Used Agitators, Blenders, Mixers in Bremen, Germany

3500 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, bump at the insulation jacket remarks: Smaller dents on feet and outlet; ...

450 liter agitator tank, Aisi 304 with agitator disc

agitator features: Motor-/gear unit with signs of corrosion; 1 hole in the fan cover (see photos)

1300 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket around half of the cylinder height; 4 support brackets, Aisi 304 (parts of the brackets were ...

Agitator tank 0.9 cbm, insulated, double jacket

• Manufacturer: Sielmann

Content: 0,9 cbm | Material: stainless steel | Material specification: 1.4401/1.4404 | I. diameter: 1100 mm | Diameter: 1274 mm | Cyl. height: 750 mm | Height agitator: 900 mm | Upper floor: 233 mm | Lower floor...

Agitator tank 12.5 cbm, with heating coil

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 pipe feet with basket-shaped bases. Inclined blade agitator from the top centered, 3.0 kW, 88 rpm. External half-pipe coil around the cylinder, 10 turns, designed for an operati...

Agitator tank 6.5 cbm, half pipe coil

• Manufacturer: Sielmann

Design: Cylinder suspended on 4 supports with dished ends. Inclined blade agitator mounted from the top center - without motor or gearbox - with baffle. External half-pipe coils around the cylinder and lower end....

5870 liter isolated agitator tank, Aisi 304 with blade agitator

Volume: 5.870 liter | Stand type: legs height adjustable | Quantity legs: 6 Piece | Insulation: available | Insulating jacket: welded | Insulation material: PU - foam | Total height: 2.000 mm | Total width: 2.02...

2900 liter insulated agitator tank, Aisi 304 with anchor agitator

Volume: 2.900 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Insulation: available | Insulating jacket: hermetically welded | Insulation material: stone wool | Diameter inside: 1.800 mm | ...

16.000 liter agitator tank, AISI 304 with blades agitator

notice: some residues of previous content, bump at the cylinder

30000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: TUCHENHAGEN

max. allowable working temperature: 80 °C notice: bump at the insulation jacket, manhole cover is missing, pipe end cut flush remarks: Manhole approx. 345 x 445 mm; height-adjustable screws of the feet are missing

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

remarks: Tank blasted and primed on the outside; Manhole diameter approx. 510 mm; 5 round connections in the lower bottom; 1 strong dent in the insulation jacket; former connections in the upper bottom cut off (s...

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

max. allowable working temperature: 120 °C remarks: Manhole diameter approx. 510 mm; 4 round openings and 1 further small opening in the lower bottom; the seam of the insulation jacket was slightly loose in one p...

1080 liter stainless steel 316 agitator tank with beam agitator

• Manufacturer: Diessel

max. allowable working temperature: 100 °C remarks: Cone height approx. 520 mm; spout with flange-mounted reduction fitting (reduced to 25 mm; end piece probably made of brass)

17620 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: AURICH Edelstahl GmbH

max. allowable working temperature: 95 °C remarks: Manhole diameter approx. 510 mm; height-adjustable screws of the feet are no longer present; 1 small pressure point in the insulation jacket

10000 liter horizontal agitator tank; Aisi304 with propeller agitator

Volume: 10.000 liter | Stand type: legs | Quantity legs: 4 Piece | Insulation: available | Insulating jacket: hermetically welded | Diameter inside: 2.000 mm | Diameter outside: 2.100 mm | Cylindrical length: 32...