Used Agitators, Blenders, Mixers in Germany

10000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

remarks: Smaller dents in the upper bottom and insulation jacket

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

14000 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm...

JANKE + KUNKEL TURBOTRON SFH ATEX agitator

• Manufacturer: IKA

Generator version with propeller agitator Max. Batch size 200 liters Atex version Infinitely variable drive up to 1,100 rpm

3500 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, bump at the insulation jacket remarks: Smaller dents on feet and outlet; ...

1300 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket around half of the cylinder height; 4 support brackets, Aisi 304 (parts of the brackets were ...

1660 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator

• Manufacturer: Bäuchle & Sohn

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 150 °C Temperature control cylinder (dj): double jacket temperature control bo...

Agitator tank 0.9 cbm, insulated, double jacket

• Manufacturer: Sielmann

Content: 0,9 cbm | Material: stainless steel | Material specification: 1.4401/1.4404 | I. diameter: 1100 mm | Diameter: 1274 mm | Cyl. height: 750 mm | Height agitator: 900 mm | Upper floor: 233 mm | Lower floor...

Paddle mixer WOLF Type WPM-150

• Manufacturer: Wolf

Paddle mixer WOLF Type WPM-150 with a volume of approx. 150 liter. - One horizontal agitator with paddles for gentle mixing of cereals and other ingredients. - Smoothly adjustable mixing speed (inverter install...

1000 liter agitator tank, Aisi 304 with ex-proof disc agitator

• Manufacturer: VATRON-MAU

technical equipment: level indicator (without guarantee), butterfly valve EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

1270 liters heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: TUCHENHAGEN

max. allowable working temperature: 95 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 95 °C Temperature control cylinder (dj): double jacket remarks: Possibly also d...

21940 liter heat-/coolable agitator tank, Aisi 316 with propeller agitator

• Manufacturer: ETA

remarks: Tank bottom and 1/3 of the cylinder can be tempered

560 liter heat-/coolable agitator tank, Aisi 316 with propeller agitator

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 10.0 bar max. allowable working temperature (dj): 150 °C Temperature control cylinder (dj): half-coil temperature control botto...

10000 liter heat-/coolable agitator tank / cream tank, Aisi 304 with anchor agitator

• Manufacturer: ABAB Allgemeine Behälter- u. Apparate Bau

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): half-coil temperature control bottom (dj): thermoplate remarks: 1 tank with 1 dent in the insulation jacket in the area of the ...