Used Agitators, Blenders, Mixers in Germany

630 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as sma...

3800 liter insulated agitator tank, Aisi 316 with 2 agitators

remarks: 3-legged frame, stainless steel with load cells (no guarantee on the functionality of the load cells)

1000 Liter insulated agitator tank, Aisi 316 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working temperature: 90 °C remarks: Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket)

15000 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Rechtecköffnung ca. 1000 x 1000 mm im Oberboden; leichter Korrsosionsansatz innen und außen

261 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: Heinrich Nowak

remarks: Diameter of hand hole approx. 150 mm; 2 of the feet are shorter than the other two feet (see photos; take this into account when setting up the vessel) EX-proof: motor is ex-proof (compliance with the ne...

11030 liter pharmacy agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: GROSS Behälter- und Anlagenbau GmbH

max. allowable working temperature: 80 °C Technical documentation: drawing,various documents ,certificate of inspection,operation manual remarks: Manhole diameter approx. 510 mm; outlet slightly damaged EX-proof:...

15600 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: Behälter KG Bremen

max. allowable working temperature: 80 °C max. allowable working overpressure (dj): 2.0 bar Temperature control cylinder (dj): squared half-coil temperature control bottom (dj): thermoplate remarks: Manhole diame...

JANKE + KUNKEL TURBOTRON SFH ATEX agitator

• Manufacturer: IKA

Generator version with propeller agitator Max. Batch size 200 liters Atex version Infinitely variable drive up to 1,100 rpm

2700 liter stainless steel 304 agitator tank with blades agitator

Volume: 2.700 liter | Lower bottom: flat bottom with slope | Upper bottom: open with loose cover | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 1.340 mm | Cylindrical height: 1.950 mm | Total hei...

5000 liter heat-/coolable agitator tank, Aisi 316 with 2 agitators

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): half-coil remarks: Heating coil outside around the lower cylinder area; 3 of the feet are equipped with load cells (no guarante...

10000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

remarks: Smaller dents in the upper bottom and insulation jacket

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

14000 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm...

1660 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator

• Manufacturer: Bäuchle & Sohn

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 150 °C Temperature control cylinder (dj): double jacket temperature control bo...