Used Extruders in Illinois, USA

WELEX 2″ 24:1 L/D EXTRUDER 17438

• Manufacturer: Welex

Welex model 200-24/1, 2″ 24:1 L/D extruder with a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 50″ centerline height. Gearbox is a Koellmann Gear and is belt driven by a 20 ...

DAVIS STANDARD 165mm (6.5″) EXTRUDER 19033

• Manufacturer: Davis-Standard

One used (1) Davis Standard model 165MM60T 165mm (6.49″) extruder having a 34:1 L/D ratio with a nine (9) zone electrically heated, water cooled (closed loop), vented and plugged barrel at presently an 89″ center...

DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869

• Manufacturer: Davis-Standard

Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...

ACTUAL AE-25/10/22 25MM PEDESTAL EXTRUDER 18705

One (1) used Actual model AE-25/10/22 25mm pedestal extruder. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, non-vented barrel. Barrel can be raised or lowered and also tilts ...

WELEX 2″ 24:1 L/D CO-EXTRUDER 17576

• Manufacturer: Welex

One (1) used 2″ 24:1 L/D Welex co-extruder. Water cooled. Missing motor, drive panel, and pedestal. Last used on a sheet line.

GLOUCESTER 3.5″ 32:1 L/D EXTRUDER 18365

One (1) Used Gloucester model 35250R2 3.5″ 32:1 extruder having an electrically heated, air cooled, vented, and plugged barrel at approximately a 65″ center line height. S/N 36736/12. Barrel is set up for Contra-...

UN 14 ZONE EXTRUDER TEMPERATURE 18779

One (1) unused extruder temperature control panel consisting of fourteen zones of Eurotherm 2216E temp controls. Was set up for use with a 4.5″ 32:1 Gloucester extruder. Labeled for 5 extruder zones, 1 screen cha...

8 ZONE EXTRUDER CONTROL CONSOLE 18091

One (1) used eight (8) zone console type control panel. Last used with a Berstorff single screw extruder.

GLOUCESTER 233-011 3.5″ EXTRUDER 12878

Gloucester 3.5″, 24:1 L/D extruder model number 233-011. S/N 233-19848-01. Electrically heated air cooled vented and plugged barrel on a 42.5″ centerline. Free standing eight zone control panel with temperature c...

70mm LEISTRITZ EXTRUDER SIDE FEEDER 18279

• Manufacturer: Leistritz

Used 70mm Leistritz twin screw side feeder Model LSB70. Order No. 310.11004.01. Machine No. 4080. New 2011.

AET dual diameter 10-6 32:1 L/D 50” centerline height film reclaim extruder

• Manufacturer: 60T 100D32

51068003 Used AET dual diameter 10-6 32:1 L/D 50" centerline height film reclaim extruder, Model 60T 100D32.

Bonnot Co. 12" Industrial Extruder – 40 HP Jacketed Barrel Screw Extruder (2000)

• Manufacturer: Bonnot

53993002 Used Bonnot Co. 12" Industrial Extruder 40 HP Jacketed Barrel Screw Extruder (2000). 12" Diameter x 47" long screw. Jacketed grooved barrel section. Driven by an approximate 40 hp, 3/60/230/460 volt, 17...