Used Extruders in Illinois, USA

Xinda PSHJ-35 Twin Screw Extruder – 35.6mm, 42:1 L/D, 600 RPM, Clam Shell Barrel, 15kW, With Conveyor & Cutter – 2021

54023001 Used Xinda Twin Screw Extruder, Model PSHJ-35. 35.6mm screw diameter; 42:1 L/D ratio; 600 RPM screw speed; 30-100 kg/hour output; Clam shell barrel. 15 kW motor, 3/60/480V. Built 2021. With cooling conve...

DAVIS STANDARD 4.5″ SINGLE STAGE 12018

• Manufacturer: Davis-Standard

Davis Standard 4.5″ single stage extruder screw. Approximately 28:1 L/D with four rows of mixing pins.

DAVIS STANDARD 4.5″ SINGLE STAGE 12022

• Manufacturer: Davis-Standard

Davis Standard 4.5″ single stage extruder screw. Approximately 30:1 L/D with three rows of mixing pins near the screw end.

DAVIS STANDARD 2.5″ BARREL WITH 2023

• Manufacturer: Davis-Standard

Davis Standard 2.5″ extruder barrel. 24:1 L/D with Xalloy 800 liner. Barrel measures approximately 10-14 millimeters of wear.

NEW / UN WELEX 4.5 12346

• Manufacturer: Welex

New chrome plated Welex 4.5″ extruder screw, S/N 18079. 36:1 L/D, 8″ long x 1″ wide, keyway 190.5″ overall length.

STEER ENGINEERING 12mm TWIN SCREW 16620

Steer Engineering Pharmaceutical twin-screw extruder, S/N EA00427. Model Omicron 12P new in 2014. Screw diameter is 12mm diameter ratio (do/di) is 1.45 flight depth is 1.9 max screw speed is 900 RPM 2HP drive, 48...

BERLYN 2″ 30:1 L/D 40 18399

One (1) Used 2” Berlyn extruder having a 30:1 L/D ratio with a six (6) zone electrically heated, non-vented, both air- and water-cooled barrel at approximately a 42″ center line height. S/N 025D379. Gearbox is a ...

WERNER & PFLEIDERER ZSK20 TWIN 17702

• Manufacturer: WP

Werner & Pfleiderer Model ZSK20 20mm co-rotating twin screw extruder. S/N 02-3108-1000-010-1, Has 40:1 L/D barrel at a 43″ center line driven through a 3:1 gearbox with a 37 newton meter torque capacity per screw...

HARTIG 2.5″ 24:1 L/D 50 18342

One (1) Used 2.5″ Hartig extruder. S/N BE-819. 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 42″ center line height. 3″ round feed entrance. Koellmann gearbox ha...

DAVIS STANDARD 3.5″ SINGLE STAGE 12024

• Manufacturer: Davis-Standard

Davis Standard 3.5″ single stage extruder screw. Approximately 24:1 L/D with five mixing pin sections.

NRM PACEMAKER III 3.5″ 32:1 18061

One (1) used NRM PM III 3.5″ 32:1 L/D extruder having a five (5) zone electrically heated, air cooled, and non-vented barrel at an approximate 42″ center line height. Gearbox has a reduction ratio of 17.42:1 and ...

WELEX 3.5″ 30:1 L/D 100 17579

• Manufacturer: Welex

One (1) used 3.5″ 30:1 L/D Welex Model 350-2-1984-RHNV extruder having an electrically heated water cooled (closed loop) non-vented barrel at a 54″ center line height. Koellmann gearbox has a reduction ratio of 1...