Used processing in Shanghai, China

ZZJ-800 Insulating Cardboard Folding Machine

Insulating cardboard folding machine is mainly used in transformer coil insulating cardboard interior casing edge fold, body insulation between phases, iron guard and so on. It meets the accuracy requirement of i...

DJJ-60 Edge Rounding Cum Shaping Machine

This machine is designed especially for milling the laminated paperboard batten into R edge or chamfering angle for the spacers in the transformer oil gap.

Transformer Insulation Paper Corrugate Forming Machine

Transformer insulation paper corrugate forming machine is dedicated equipment for forming transformer corrugated insulation paper plate.

Iron Transformer Core molding machine

Core molding machine is used for pressing molding and die-filling of rolled core on assembly line. The rolled round core is pressed to be in specified size by the equipment. The matched core die are pressed into ...

Vertical Semi-Automatic Winding Machine for power transformer coil

Vertical winding machine is mainly used for winding large power transformer coil, which is an ideal equipment for high voltage, ultra-high voltage, continuous and pie coil. According to the type, the machine can ...

80 Ton Transformer Core Stacking and Tilting Table

FT80T core overturning table equipment and standard accessories are used for overlaying and overturning of three-column and five-column cores of 80T transformers.

Silicon steel V Notching Cutting Machine for Transformer V Cutting Machine Line Cut Line

VY Series Notching Machine for Transformer "V" Cutting The V notching machine is a special equipment for cutting V-shaped mouth of silicon steel sheet transformer core yoke. For example, one edge of V-shaped cutt...

Automatic Transformer Toroidal Core Winding Machine

The automatic toroidal core winder for producing of toroidal core made from grain oriented steel or non-oriented steel for small transformers, transmitters, instrument and voltage transformers, chokes and variabl...

Multi-head pay-off stand

• Manufacturer: Pago

Wire pay off device is recommended to be used with low voltage winding machine cooperatively according to the cross-sectional area of products requirements ,meet the function which up to 12 flat wire pay off at t...

CNC Busbar Punching and Shearing Machine

• Manufacturer: Trihope

1.Machine introduction 1)CNC-BP series CNC Busbar Punching and Shearing Machine is a professional high efficient and high accurate busbar processing machinery controlled by computer. -The punching dies,shearing d...

Transformer Insulation parts CNC Insulators Processing Center

CNC Insulators Processing Center is mainly used for processing large insulating parts such as end ring, pressing plate and wire clamp in transformer can mainly process the inner and outer circles of the end ring,...

Parallel Processing UPS SANUPS E23A/E33A E23A204

• Manufacturer: SANYO DENKI SHANGHAI

Ups topology: Parallel processing | No. of input phases/wires: 3-phase 3-wire | Rated input voltage[v]: 200/205/210 | Rated input frequency[hz]: 50/60 | Input power factor: 0.98 or greater | Required input capac...

Parallel Processing UPS SANUPS E23A/E33A E23A503

• Manufacturer: SANYO DENKI SHANGHAI

Ups topology: Parallel processing | No. of input phases/wires: 3-phase 3-wire | Rated input voltage[v]: 200/205/210 | Rated input frequency[hz]: 50/60 | Input power factor: 0.98 or greater | Required input capac...

Parallel Processing UPS SANUPS E23A/E33A E23A203

• Manufacturer: SANYO DENKI SHANGHAI

Ups topology: Parallel processing | No. of input phases/wires: 3-phase 3-wire | Rated input voltage[v]: 200/205/210 | Rated input frequency[hz]: 50/60 | Input power factor: 0.98 or greater | Required input capac...

Parallel Processing UPS SANUPS E23A/E33A E23A104

• Manufacturer: SANYO DENKI SHANGHAI

Ups topology: Parallel processing | No. of input phases/wires: 3-phase 3-wire | Rated input voltage[v]: 200/205/210 | Rated input frequency[hz]: 50/60 | Input power factor: 0.98 or greater | Required input capac...