Building Filters
Nardini FRN60 - VN826 radial drilling machine
- Manufacturer: Nardini
Nardini FRN60 Radial Drill - VN826 Used Product Code: VN826 - Location NI TECHNICAL INFORMATION Brand Nardini Model FRN-60 GENERAL MEASUREMENTS Width: 2.5 Height: 2.5 Length: 1.2 Weight: 5 ATTENTION: Unloading at...
Mechanical Lathe Nardini 220
- Manufacturer: Nardini
Lathe Nardini 220 II 1500 mm between ends With 3-nut plate and 2 bezels
Brazil
Radial drill Nardini FRN 60
- Manufacturer: Nardini
Nardini Radial Drill FRN 60 1600mm flag Maximum drilling capacity: 60 mm
Brazil
NARDINI ND-250 LATHE
- Manufacturer: Nardini
NARDINI ND 250 UNIVERSAL LATHE. 18 speeds on the headstock; Accompanies: 01 3-point telescope; Lighting; Rotating Tip. Equipment in excellent conditions of use.
Joinville - State of Santa Catarina, BrazilNARDINI INSA MECHANICAL TURN 4000x800MM
- Manufacturer: Nardini
No comments have been posted for this product, be the first! Comment Nardini INSA 4000x800mm lathe Brand: Nardini Model: INSA Between tips: 4000mm Passage over busbar: 800mm Spindle passage 80mm With: Bezel Busba...
São Paulo, BrazilNARDINI DT-650 MECHANICAL TURN - 650x1000MM
- Manufacturer: Nardini
No comments have been posted for this product, be the first! Comment Nardini DT-650 lathe - 650x1000MM Brand: Nardini Model: DT-650 Between tips: 1000mm Passage over busbar: 650mm With: 2-contact and 3-contact be...
São Paulo, Brazil
lathe spindle set nardini with hexagonal rod and square rod, with bearing
- Manufacturer: Nardini
lathe spindle set nardini with hexagonal rod and square rod, with bearing for nardini micro 500 lathe
BrazilNARDINI NODUS ND325 650X2200MM LATHE
- Manufacturer: Nardini
No comments have been posted for this product, be the first! Comment Nardini Nodus ND325 lathe Model: NODUS ND325 Year: 2007 Diameter over bar: 650 mm Distance between points: 2200 mm Passage in the tree: 48mm Vo...
São Paulo, Brazil
NARDINI ND-250BS LATHE
- Manufacturer: Nardini
Nardini ND-250 BS lathe. Capacity 500×1500. -Movable bezel; -Refrigeration system; -Electromagnetic brake; -Plate with 3 nuts. Complete machine, used in good condition.
Joinville - State of Santa Catarina, Brazil
Nardini lathe
- Manufacturer: Nardini
Nardini lathe Prepared for NR-12 Plate with 3 and 4 spindles Digital on 2 axes 1,500 mm busbar 680 mm plate Equipment in Caxias do Sul
NARDINI GPRII
- Manufacturer: Nardini
- Spindle bore: 52 mm
Command: MCS RX510 | Permissible diameter on the busbar: 440 mm | Distance between ends: 1.000 mm | Admissible diameter over the table wings: 400 mm | Admissible diameter over the cross slide: 250 mm | Cross car...
Limeira - State of São Paulo, Brazil
NARDINI LOGIC 175
- Manufacturer: Nardini
- Spindle bore: 52 mm
Command: MCS | Permissible diameter on the busbar: 350 mm | Distance between ends: 490 mm | Admissible distance between the plate and the point: 470 mm | Admissible diameter over the cross slide: 160 mm | Cross ...
Limeira - State of São Paulo, Brazil
NARDINI ND250
- Manufacturer: Nardini
Permissible diameter on the busbar: 500 mm | Distance between ends: 1.500 mm | Admissible diameter over the table wings: 450 mm | Admissible diameter over the cross slide: 330 mm | Allowable diameter in the armh...
Limeira - State of São Paulo, Brazil
NARDINI MASCOTE MS205
- Manufacturer: Nardini
- Spindle bore: 46 mm
Permissible diameter on the busbar: 410 mm | Distance between ends: 1.000 mm | Admissible diameter over the table wings: 370 mm | Admissible diameter over the cross slide: 260 mm | Allowable diameter in the armh...
Limeira - State of São Paulo, Brazil
NARDINI MC195E
- Manufacturer: Nardini
- Spindle bore: 46 mm
Height between tips: 195 mm | Distance between ends: 1.000 mm | Permissible diameter on the busbar: 390 mm | Admissible diameter over the cross slide: 220 mm | Allowable diameter in the armhole: 580 mm | Useful ...
Limeira - State of São Paulo, Brazil
