Building Filters
NARDINI SAGAZ
- Manufacturer: Nardini
- Spindle bore: 80 mm
Distance between ends: 1.000 mm | Permissible diameter on the busbar: 400 mm | Admissible diameter over the table wings: 740 mm | Admissible diameter over the cross slide: 642 mm | Cross car course: 434 mm | Too...
Limeira - State of São Paulo, Brazil
NARDINI GPRII
- Manufacturer: Nardini
- Spindle bore: 52 mm
Command: Adtec (new and with warranty) | Permissible diameter on the busbar: 440 mm | Distance between ends: 1.000 mm | Admissible diameter over the table wings: 400 mm | Admissible diameter over the cross slide...
Limeira - State of São Paulo, Brazil
NARDINI LOGIC 250
- Manufacturer: Nardini
- Spindle bore: 80 mm
Command: Fagor 8035T | Permissible diameter on the busbar: 500 mm | Distance between ends: 1.050 mm | Admissible distance between the plate and the point: 1.020 mm | Admissible length with automatic tower: 920 m...
Limeira - State of São Paulo, Brazil
2012 NARDINI LOGIC 195II
- Manufacturer: Nardini
- Spindle bore: 52 mm
Command: Fagor 8055 | Permissible diameter on the busbar: 440 mm | Distance between ends: 1.000 mm | Admissible diameter over the table wings: 400 mm | Admissible diameter over the cross slide: 250 mm | Cross ca...
Limeira - State of São Paulo, Brazil
2005 NARDINI DIPLOMAT LOGIC 350 FAST-TRACE
- Manufacturer: Nardini
- Spindle bore: 120 mm
Command: FAGOR 8055 | Permissible diameter on the busbar: 700 mm | Distance between ends: 2.050 mm | Admissible distance between the plate and the point: 2.020 mm | Admissible diameter over the cross slide: 420 ...
Limeira - State of São Paulo, Brazil
Nardini FRN60 - VN826 Radial Drill
- Manufacturer: Nardini
Used Nardini FRN60 - VN826 Radial Drill Product Code: VN826 - Location: NI TECHNICAL INFORMATION Nardini Brand Model: FRN-60 GENERAL DIMENSIONS Width: 2.5 Height: 2.5 Length: 1.2 Weight: 5 ATTENTION: Unloading at...
NARDINI INSA MECHANICAL TURN 4000x800MM
- Manufacturer: Nardini
No comments have been posted for this product, be the first! Comment Nardini INSA 4000x800mm lathe Brand: Nardini Model: INSA Between tips: 4000mm Passage over busbar: 800mm Spindle passage 80mm With: Bezel Busba...
São Paulo, BrazilNARDINI DT-650 MECHANICAL TURN - 650x1000MM
- Manufacturer: Nardini
No comments have been posted for this product, be the first! Comment Nardini DT-650 lathe - 650x1000MM Brand: Nardini Model: DT-650 Between tips: 1000mm Passage over busbar: 650mm With: 2-contact and 3-contact be...
São Paulo, BrazilNARDINI NODUS ND325 650X2200MM LATHE
- Manufacturer: Nardini
No comments have been posted for this product, be the first! Comment Nardini Nodus ND325 lathe Model: NODUS ND325 Year: 2007 Diameter over bar: 650 mm Distance between points: 2200 mm Passage in the tree: 48mm Vo...
São Paulo, Brazil
NARDINI GPRII
- Manufacturer: Nardini
- Spindle bore: 52 mm
Command: MCS RX510 | Permissible diameter on the busbar: 440 mm | Distance between ends: 1.000 mm | Admissible diameter over the table wings: 400 mm | Admissible diameter over the cross slide: 250 mm | Cross car...
Limeira - State of São Paulo, Brazil
NARDINI ND250
- Manufacturer: Nardini
Permissible diameter on the busbar: 500 mm | Distance between ends: 1.500 mm | Admissible diameter over the table wings: 450 mm | Admissible diameter over the cross slide: 330 mm | Allowable diameter in the armh...
Limeira - State of São Paulo, Brazil
NARDINI LOGIC 175
- Manufacturer: Nardini
- Spindle bore: 52 mm
Command: MCS | Permissible diameter on the busbar: 350 mm | Distance between ends: 490 mm | Admissible distance between the plate and the point: 470 mm | Admissible diameter over the cross slide: 160 mm | Cross ...
Limeira - State of São Paulo, Brazil
NARDINI ND250
- Manufacturer: Nardini
Permissible diameter on the busbar: 500 mm | Distance between ends: 1.500 mm | Admissible diameter over the table wings: 450 mm | Admissible diameter over the cross slide: 330 mm | Allowable diameter in the armh...
Limeira - State of São Paulo, Brazil
NARDINI MC195E
- Manufacturer: Nardini
- Spindle bore: 46 mm
Height between tips: 195 mm | Distance between ends: 1.000 mm | Permissible diameter on the busbar: 390 mm | Admissible diameter over the cross slide: 220 mm | Allowable diameter in the armhole: 580 mm | Useful ...
Limeira - State of São Paulo, Brazil
NARDINI MASCOTE MS205
- Manufacturer: Nardini
- Spindle bore: 46 mm
Permissible diameter on the busbar: 410 mm | Distance between ends: 1.000 mm | Admissible diameter over the table wings: 370 mm | Admissible diameter over the cross slide: 260 mm | Allowable diameter in the armh...
Limeira - State of São Paulo, Brazil
