Used Millutensil Machine Tools

Millutensil MIL 305 (3000x2400 mm)
- new
- Manufacturer: Millutensil
The MIL series version for large size moulds The MIL 305 spotting press is available in the floor version and in the pit version. The max clamping force, 4.000 kN, can optionally be increased to 5.000 kN. The pr...
Milan, Italy
Millutensil MIL 408 (4000x2500 mm)
- new
- Manufacturer: Millutensil
The MIL series version for large size moulds The MIL 408 spotting press is available in the floor version and in the pit version. The max clamping force, 4.000 kN, can optionally be increased to 5.000 kN. The pr...
Milan, Italy
Millutensil Hydraulic power unit
- new
- Manufacturer: Millutensil
Separate hydraulic power unit on trolley with connections for hydraulic cylinders (4+4) To test of slides’ and hydraulic cylinders’ movements a separate and standalone hydraulic power unit on the trolley has been...
Milan, Italy
Millutensil Zig Zag feed lines
- new
- Manufacturer: Millutensil
ZIG ZAG LINES FOR DISK CUTTING ZIG ZAG LINES FOR DISK CUTTING Millutensil manufactures zig-zag automatic lines for discs cutting combined with the press.
Milan, Italy
Millutensil MIL 4030 (4000x3000 mm)
- new
- Manufacturer: Millutensil
The MIL Compact series version for large size moulds The press is available in both floor and pit version. The press is equipped with user-friendly graphics control panel, monitored through Siemens PLC commanded ...
Milan, Italy
Millutensil Upper plate tilting by 150°
- new
- Manufacturer: Millutensil
Press upper plate tilting by 150°, floor version For the versions installed on the floor only. In order to increase comfort and improve access to the press upper plate and to the moulds fastened on it, the upper ...
Milan, Italy
Millutensil Lower Plate tilting by ±70°
- new
- Manufacturer: Millutensil
Lower Plate tilting by ±70°, Front/Back Side, floor version For the versions installed on the floor only. Thanks to 2 hydraulic cylinders, the lower plate can be tilted up to 70°, on the front and back side, to t...
Milan, Italy
Millutensil MIL 3530 (3500x3000 mm)
- new
- Manufacturer: Millutensil
The MIL Compact series version for large size moulds The press is available in both floor and pit version. The press is equipped with user-friendly graphics control panel, monitored through Siemens PLC commanded ...
Milan, Italy
Millutensil Automatic wax injection unit
- new
- Manufacturer: Millutensil
Automatic special wax injection unit This attachment provides a way to inject special wax at a low pressure into the mould cavity. This enables the mould maker to check dimensions and thickness of pre-production ...
Milan, Italy
Millutensil MIL 122-123 (1200x1000 mm)
- new
- Manufacturer: Millutensil
The smallest version of the MIL series The press is produced in two models, MIL 122 – MIL 123, which differ in performance. The press is available only in floor version. Both models are equipped with user-friendl...
Milan, Italy
Millutensil BV 25 P (770x660 mm)
- new
- Manufacturer: Millutensil
- Model: BV25
The smallest version of the BV series The BV 25 P is the smallest version of the Millutensil’s spotting presses. Platen dimensions are 770×660 mm (31X25 inches). The max. clamping force is 180kN. The max. load ca...
Milan, Italy
Millutensil MIL 142-143 (1400x1200 mm)
- new
- Manufacturer: Millutensil
The MIL series version for medium size moulds The press is produced in two models, MIL 142 – MIL 143, which differ in performance. The press is available only in floor version. Both models are equipped with user-...
Milan, Italy
Millutensil MIL 202-203 (2000x1500 mm)
- new
- Manufacturer: Millutensil
The MIL series version for medium size moulds The press is produced in two models, MIL 202- MIL 203, which differ in performance. The press is available only in floor version. Both models are equipped with user-f...
Milan, Italy
Millutensil MIL 262-263 (2500x2000 mm)
- new
- Manufacturer: Millutensil
The MIL series version for medium and large size moulds The press is produced in two models, MIL 262 – 263, which differ in performance. They are both available in the floor version and in the pit version. Both m...
Milan, Italy
Millutensil MIL 162-163 (1600x1300 mm)
- new
- Manufacturer: Millutensil
The MIL series version for medium size moulds The press is produced in two models, MIL 162 – MIL 163, which differ in performance. The press is available only in floor version. Both models are equipped with user-...
Milan, Italy