
Millutensil Tilting upper plate
- Manufacturer: Millutensil
Tilting upper plate forward by 100° For optimal access to the mould, the press upper plate can be tilted forward by 100°. By tilting the press plate on the short side, the operator can work at an optimal height, ...
Milan, Italy
Millutensil Hydromechanical safety devices
- Manufacturer: Millutensil
Hydromechanical safety devices against the accidental fall of the upper plate 2 hydromechanical fall prevention devices on the right and left sides of the press upper plate operating for the entire stroke length....
Milan, Italy
Millutensil Convenient control from the platform
- Manufacturer: Millutensil
CONVENIENT CONTROL In frontal side, the spotting press models BV 32/33 and BV 34/34 are equipped with a platform. A ladder leads to the platform, whose perimeter is equipped with a glass parapet to guarantee the ...
Milan, Italy
Millutensil Extensible lower plate
- Manufacturer: Millutensil
Lower plate Hydraulic cylinders drive the lower extensible plate outside the columns in an easily accessible position for the work outside the press. It slides on roller bearings and is laterally guided by ball b...
Milan, Italy
Millutensil Hydraulic power unit
- Manufacturer: Millutensil
Separate hydraulic power unit on trolley with connections for hydraulic cylinders (4+4) To test of slides’ and hydraulic cylinders’ movements a separate and standalone hydraulic power unit on trolley has been des...
Milan, Italy
Millutensil Automatic wax injection unit
- Manufacturer: Millutensil
Automatic special wax injection unit – Available on MIL 122/123, MIL 142/143, MIL 162/163, MIL 202/203, MIL 252/253 This attachment provides a way to inject special wax at a low pressure into the mould cavity. T...
Milan, Italy
Millutensil 360° Rotating upper plate
- Manufacturer: Millutensil
Rotating upper plate For optimal access to the mould, the press upper plate can be rotated forward by 360° on the short side and blocked by four hydraulic wedges. In this way, the operator can work at an optimal ...
Milan, Italy
Millutensil Control of parallelism (E series)
- Manufacturer: Millutensil
Electronic management of the upper plate up/down stroke (for E series) The upper plate up/down stroke is based on a fully electronic management of the main hydraulic system, which through special proportional ser...
Milan, Italy
Millutensil Zig Zag feed lines
- Manufacturer: Millutensil
ZIG ZAG LINES FOR DISK CUTTING ZIG ZAG LINES FOR DISK CUTTING Millutensil manufactures zig-zag automatic lines for discs cutting combined with the press.
Milan, Italy
Millutensil Touch Panel (E series)
- Manufacturer: Millutensil
Full control of the machine (E series) TOUCH PANEL FOR BV-E SERIES Millutensil was the first worldwide to introduce a TOUCH PANEL on its spotting presses. The electronic PLC handles all the functions of the press...
Milan, Italy
Millutensil 0°-180° rotating table
- Manufacturer: Millutensil
Extensible plate with integrated 0-180° or 0-90°-120°-180-240°-270° rotating table formulti-component moulds For the fitting of multi-component or multicolour moulds, the rotating table is fully integrated in th...
Milan, Italy
Millutensil Hydraulic power unit
- Manufacturer: Millutensil
Separate hydraulic power unit on trolley with connections for hydraulic cylinders (4+4) To test of slides’ and hydraulic cylinders’ movements a separate and standalone hydraulic power unit on the trolley has been...
Milan, Italy
Millutensil Lower Plate tilting by ±70°
- Manufacturer: Millutensil
Lower Plate tilting by ±70°, Front/Back Side, floor version For the versions installed on the floor only. Thanks to 2 hydraulic cylinders, the lower plate can be tilted up to 70°, on the front and back side, to t...
Milan, Italy
Millutensil Automatic wax injection unit
- Manufacturer: Millutensil
Automatic special wax injection unit This attachment provides a way to inject special wax at a low pressure into the mould cavity. This enables the mould maker to check dimensions and thickness of pre-production ...
Milan, Italy
Millutensil Upper plate tilting by 180°
- Manufacturer: Millutensil
Press upper plate tilting by 180° to the floor, pit version In order to increase comfort and improve access to the press upper plate and to the moulds fastened on it, the upper plate can be tilted by up to ~180° ...
Milan, Italy

