Used Granulators & Pelletizers in Illinois, USA

NELMOR G1436MB GRANULATOR WITH FEED 14098

• Manufacturer: Nelmor

Nelmor model G1436MB granulator. S/N 8907-28788. 14″ x 36″ feed throat, 3 knife solid rotor, 2 bed knife, 75HP 230/460V motor. Forklift base, insulated body panels and feed roll in-feed hopper with 8″ x 13″ side ...

NELMOR G810M1 GRANULATOR WITH PROFILE 16628

• Manufacturer: Nelmor

Nelmor model G810M1 granulator, S/N 7205-4995. 8″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 5HP 230/460V motor. Double wall tray feed hopper, with right hand 3.5″ x 3.5″ profile chute b...

SEM / NELMOR G1220M1P GRANULATOR 18498

• Manufacturer: Nelmor

SEM model 22 granulator (Nelmor G1220M1P S/N 9301-32391) 12″ x 20″ feed throat. 3 knife solid rotor, 2 bed knife. 20 HP 208-230/460-volt motor. Tray feed hopper with sound enclosure. 4″ OD right hand airveyor dis...

CUMBERLAND 56T GRANULATOR WITH PADDLE 18251

• Manufacturer: Cumberland

Cumberland model 56T paddle roll granulator. S/N 209350-99008. 8″ x 56″ feed throat. 3 knife rotor, 2 bed knife. 10 HP 230/460-volt motor. Paddles are driven by a D/C motor with a Dayton variable speed drive. Eva...

NELMOR G1012M1 GRANULATOR WITH FEED 5602

• Manufacturer: Nelmor

Nelmor model G1012M1 granulator. S/N 7908-13725. 10″ x 12″ feed throat. 3 knife open rotor, 2 bed knife. 10HP 230/460V motor. 3/4HP side mounted blower discharge with 4″ OD outlet. 9″ wide front mounted knurled s...

BALL & JEWEL BJG1634 GRANULATOR 12927

• Manufacturer: Ball & Jewell

Ball & Jewel model BJG1634 granulator. S/N 9511-37441. 16″ x 34″ feed throat, 3 knife open rotor, 2 bed knife tangential cutting chamber, dual flywheel. Twin 30HP 460V motors, manual jack screw hopper tilt back a...

CUMBERLAND 484 GRANULATOR WITH FEED 17971

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 521000-85003, 14″ x 16″ feed throat. 3 knife twin shear rotor. 2 bed knives. 15 HP 460v motor. 4″ OD left hand airveyor. Insulated front tray feed hopper with rear mounted 8″ ...

RAPID 2442RS HOG GRANULATOR 18894

Rapid model 2442RS hog granulator. S/N 85.324. 24″ x 24″ feed throat. Belt driven 20 knife hog rotor with 24mm bolt size knives. 3 bed knives. 100 HP 230/460-volt 1760 RPM motor motor. Dual flywheels. 8″ OD airve...

CUMBERLAND FX1628 GRANULATOR SYSTEM 19037

• Manufacturer: Cumberland

Used Cumberland model FX1628 granulator. S/N FX1628-21010. 16″ x 28″ feed throat with offset cutting chamber. 3 knife dual flywheel open rotor with two bed knives. 6″ OD airveyor discharge. Belt driven by a 30 HP...

CUMBERLAND 5018H HOG GRANULATOR 18728

• Manufacturer: Cumberland

Cumberland model 50180H hog granulator. S/N 551000-84002. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. Pelican style in-feed hopper. 160mm rotor bearings with a...

CONAIR / WORTEX TF1624 GRANULATOR 14783

• Manufacturer: Conair

Conair / Wortex model TF1624 granulator. S/N Q-6859. 16″ x 24″ feed throat, 3 knife slant cut open rotor, 2 bed knife, tangential cutting chamber. 30HP 230/460V motor, insulated tray feed hopper, insulated body p...

BALL & JEWEL CGMB2045 GRANULATOR 18778

• Manufacturer: Ball & Jewell

Ball & Jewel model CGMB2045 granulator (Nelmor G2045MB). S/N 05L06403. 20″ x 45″ feed throat. Tangential cutting chamber. 3 knife open rotor with 2 bed knives. Insulated conveyor feed hopper and body panels. 8″ O...

CONDUX CS500/1000 GRANULATOR 1725

• Manufacturer: Condux

Condux model CS500/1000-III granulator, S/N 44. Approximately 20″ x 40″, 6 knife fly, beam support rotor, 2 bed knife, 24″ base. No starter and no hydraulics.Price: $15,000.00, as is, where is.

NELMOR G3036M2 GRANULATOR 4494

• Manufacturer: Nelmor

Nelmor G3036M2 granulator, S/N 7604-8858. 10 knife staggered hog rotor, 2 bed knife, 30″ x 36″ feed throat, mounted on a forklift base. Hydraulically assisted cradle side feed hopper, twin 125HP 460V 1,140 RPM mo...

CUMBERLAND 484 GRANULATOR WITH FEED 18635

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 421000-92513. 14″ x 16″ feed throat. 3 knife slant cut rotor, 2 bed knife. 15 HP 460-volt motor. Front feed roll in-feed only. Polynetics 15″ wide steel grooved feed rolls are...