Used Granulators & Pelletizers in Illinois, USA

CONAIR / WORTEX TF1624 GRANULATOR 14783

• Manufacturer: Conair

Conair / Wortex model TF1624 granulator. S/N Q-6859. 16″ x 24″ feed throat, 3 knife slant cut open rotor, 2 bed knife, tangential cutting chamber. 30HP 230/460V motor, insulated tray feed hopper, insulated body p...

BALL & JEWEL CGMB2045 GRANULATOR 18778

• Manufacturer: Ball & Jewell

Ball & Jewel model CGMB2045 granulator (Nelmor G2045MB). S/N 05L06403. 20″ x 45″ feed throat. Tangential cutting chamber. 3 knife open rotor with 2 bed knives. Insulated conveyor feed hopper and body panels. 8″ O...

CONDUX CS500/1000 GRANULATOR 1725

• Manufacturer: Condux

Condux model CS500/1000-III granulator, S/N 44. Approximately 20″ x 40″, 6 knife fly, beam support rotor, 2 bed knife, 24″ base. No starter and no hydraulics.Price: $15,000.00, as is, where is.

GLAVES GCD-75C 24 KNIFE PELLETIZER 19029

Used Glaves model GCD-75C pelletizer. Dual drive machine, one for the cutter head and one for the top pull roll. 75mm entrance. 24 knife helical cutter head. Mounted on casters.

NELMOR G1220M1 GRANULATOR WITH SIDE 16617

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 7612-10077. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife. 20HP 230/460V motor. Single wall tray feed hopper evacuated by a side mounted Nelmor model F410 1HP blower...

NELMOR G1220M1 GRANULATOR WITH PIPE 16678

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 8010-15995. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife, 25HP 230/460V motor. Left hand 10″ x 5.75″ side profile chute, in-feed only. Side mounted 5003FD 3HP blowe...

WEIMA ZMK60 SHREDDER WITH GRANULATOR 18272

• Manufacturer: Weima

Used shredder / grinder combination system including the following:Weima four shaft shredder model ZMK60 with dual 25 HP 460-volt motors and controls. Has a 74″ x 55″ hopper opening narrowing to a 27″ x 50″ wide ...

CUMBERLAND 284 GRANULATOR WITH FEED 17466

• Manufacturer: Cumberland

Cumberland model 284 granulator, S/N 525525-84012, 10″ x 12″ feed throat, 3 knife open slant cut rotor, 2 bed knife, 7.5 HP 460-volt motor, insulated tray feed hopper with rear facing 8″ wide knurled steel and in...

CUMBERLAND 484 GRANULATOR WITH FEED 18635

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 421000-92513. 14″ x 16″ feed throat. 3 knife slant cut rotor, 2 bed knife. 15 HP 460-volt motor. Front feed roll in-feed only. Polynetics 15″ wide steel grooved feed rolls are...

BALL & JEWEL BP27 GRANULATOR 14157

• Manufacturer: Ball & Jewell

Ball & Jewel model BP27 granulator. S/N 99K03252. 12″ x 15″ feed throat, 3 knife solid rotor, 2 bed knife 20 HP 230/460-volt motor. Double wall tray / robot feed hopper bin discharge. Mounted on casters, complete...

CUMBERLAND 584 GRANULATOR WITH INTERNAL 17893

• Manufacturer: Cumberland

Cumberland model 584 granulator, S/N 335000-89506, 14″ x 20″ feed throat, 3 knife open slant cut rotor, 2 bed knife, 20 HP 460-volt motor, insulated tray feed hopper and body panels, internal blower discharge wit...

CUMBERLAND 484 GRANULATOR WITH HARD 17373

• Manufacturer: Cumberland

Cumberland model 484 granulator, S/N 421000-94010, 14″ x 16″ feed throat, 3 knife open slant cut rotor with hard facing, 2 bed knife, hard faced cutting chamber, insulated tray feed hopper and body panels, 15 HP ...

CONAIR/MARTIN CK1418 GRANULATOR 14724

• Manufacturer: Conair

Granutec model TFG1416.30 granulator. S/N 1290.1529. 14″ x 16″ feed throat, 3 knife open rotor, 2 bed knife, 30HP 460V motor. Side feed insulated tray feed hopper and body panels. Tangential cutting chamber, 6″ r...

LR SYSTEMS SG400 GRANULATOR 14125

LR systems model SG400 granulator. S/N none. 16″ x 20″ feed throat 2 knife open rotor. Hook fly knives, 2 bed knives. Approximately 20HP 460V motor conveyor feed hopper, 6″ airveyor discharge to rear mounted blow...

CUMBERLAND 284 GRANULATOR WITH FEED 12939

• Manufacturer: Cumberland

Cumberland model 284 granulator, S/N 325525-83061, 10″ x 12″ feed throat, 3 knife open rotor, 2 bed knife, approximate 2.75″ diameter x 8″ wide grooved knurled & interlocked steel feed rolls. Pneumatic pinched in...