Used Materials Testing in South Africa

Compression and Flexural Frames (UTCM-3722)

• Manufacturer: Labequip

Compression and Flexural Machines Product Code: Description: The UTCM-3722 and UTCM-3742, very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimen...

Linear Shrinkage Mould (UTS-0235)

• Manufacturer: Labequip

Soil Classification The UTS-0235, Linear Shrinkage Mould is 140 mm long and 12.5mm radius and is used for the determination of the total linear shrinkage of soils, and indicates the plastic properties of soils wi...

Automatic Electronic Bitumen Penetrometer (UTB-0126)

Bitumen and Bituminous Binders Product codes: The UTB-0126 Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetra...

Automatic Asphalt Indentation Penetrometer (UTAS-2130)

Design and Testing of Bituminous Mixtures Product Codes: Description: UTAS-2130 Automatic Indentation Penetrometer determines the resistance of an asphalt cube and cylindrical specimens to indentation when force ...

MOT Straightedge (UTAS-2127)

Design and Testing of Bituminous Mixtures Product Codes: Description: The straightedge is used for measuring single irregularities attributable to quality defects in new surface course(s) of roads, airfields and ...

Travelling Beam Device (UTAS-2125)

• Manufacturer: Labequip

Design and Testing of Bituminous Mixtures Description: The UTAS-2125 Travelling Beam Device is used to check for any irregularities in both concrete and bituminous road surfaces. Deviation of the surface from a s...

Mechanical Strain Gauge (UTC-3110)

• Manufacturer: Labequip

Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Product Codes: UTC-3110 Mechanical Strain Gauge 100 mm Measuring Base UTC-3130 Mechanical Strain Gauge 300 mm Mea...

Distance Pieces and Platens for Frames (UTCM-4630)

• Manufacturer: Labequip

Compression and Flexural Machines Product Code: Distance Pieces for Frame: Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the ...

Oil and Water Constant Pressure System (UTS-2408)

• Manufacturer: UTEST

Soil Mechanics Product Code: The Oil and Water Constant Pressure Unit is extremely versatile and can be used in conjunction with a wide range of test equipment. The unit provides continuous variable pressure up t...

Deformation of curved-axis beams (FL 170)

• Manufacturer: Labequip

elastic deformation of curved-axis beams Description: In construction engineering, a distinction is made between beams and arches. An arch is a statically indeterminate supported structure with a curved axis and ...

UTEST Software (USOFT-4930.FPR)

• Manufacturer: UTEST

Compression and Flexural Machines Product Code: Description: The Automatic Compression/ Flexure Testing Machine can be controlled (Start, stop commands) by a computer with the software USOFT-4930.FPR (given free ...

Buckling of bars (SE 110.57)

• Manufacturer: Labequip

demonstration of buckling in bars Description: Long and slim components such as bars, beams and columns are often subjected to compressive forces along their long axis owing to their function. Under the influence...

Non-Nuclear Asphalt Density Gauge (UTAS-2160)

• Manufacturer: Labequip

Design and Testing of Bituminous Mixtures Description: Non-Nuclear Asphalt Density Gauge is used for determination of density of asphalt specimens with non-nuclear method. UTAS-2160 is equipped with a touch scree...

Motorized & Manual Liquid Limit Device (Casagrande) (UTS-0200B)

• Manufacturer: Casagrande

Soil Classification The UTEST Manual and Motorized Liquid Limit Apparatus (Casagrande) are used to determine the moisture content at which clay soils pass from plastic to liquid state. The Devices consist of an a...

Sand Cone Sets (UTS-0950)

• Manufacturer: UTEST

Compacted Road Base and Sub-base Soils Product Code: Description: The UTS-0950 and UTS-0960 Sand Cone Sets are used for the determination of the degree of compaction on site. UTS-0950 includes double cone, plasti...