Test, Lab, Medical equipment » Materials Testing » South Africa

Building Filters

270

Used Materials Testing in South Africa

  • Capping Retainers (UTC-0372A)

    Capping Retainers (UTC-0372A)

    • Manufacturer: Labequip

    Compression and Flexural Testing Machines Product Code: Description: Unbounded Cap is used for determining of compressive strength of hardened concrete cylinders as alternative method to the sulphur hot capping o...

    Alberton, South Africa
  • Skid Resistance and Friction Tester

    Skid Resistance and Friction Tester (UTA-0830/E)

    • Manufacturer: Labequip

    Mechanical and Physical Properties Product Code: The Skid Resistance and Friction Tester is used for the measurement of surface friction properties. The apparatus is suitable for both site and laboratory applicat...

    Alberton, South Africa
  • Vibrating Compaction Hammer (UTC-0944)

    Vibrating Compaction Hammer (UTC-0944)

    • Manufacturer: Labequip

    Hardened Concrete Testing Product Codes: Description: UTC-0944 Vibrating Compaction Hammer with the shank and tamping plate is used for moulding cylindrical test specimens which are used for testing compressive o...

    Alberton, South Africa
  • V Funnel (UTC-0540)

    V Funnel (UTC-0540)

    • Manufacturer: UTEST

    Fresh Concrete Testing Description: The UTC-0540 V Funnel apparatus is used to evaluate the flow time of freshly mixed self-compacting concrete. The test is not suitable when the maximum size of the aggregate exc...

    Alberton, South Africa
  • Vebe Consistometer (UTC-0560E)

    Vebe Consistometer (UTC-0560E)

      Fresh Concrete Testing Product Codes: Description: UTC-0560E model consistometer conforms to EN 12350-3 for determining the consistency of fresh concrete by means of the Vebe time. The unit consists of a vibratin...

      Alberton, South Africa
    • FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac

      FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac III)

      • Manufacturer: Labequip

      Advanced Soil Systems ASTM D-5321 and D-6243 ASTM 3080/T236 BS 1377 The ShearTrac IIITM system is capable of performing the consolidation and shear- ing phases of a 305 mm x 305 mm (12 x 12 in. by 200mm(8.0 in) h...

      Alberton, South Africa
    • ATOMIC 2000KN CONCRETE CUBE PRESS

      ATOMIC 2000KN CONCRETE CUBE PRESS COMPLETE WITH CONTROLLER (LESC001)

      • Manufacturer: Atomic

      The Atomic Concrete Cube Press frames for concrete cubes consist of a rigid four column frame. Our frames provide the stability needed for accurate and repeatable test results, over the years of operation. The fr...

      Alberton, South Africa
    • RSI-ShearTrac-II (RSI-ShearTrac-II)

      RSI-ShearTrac-II (RSI-ShearTrac-II)

        Classification Tests Product Code: RSI-ShearTrac-II / 13 kN (3,000 lbs.) frame capacity Description: The Rock Shear Interface (RSI) is a versatile system capable of performing the consolidation and shearing phase...

        Alberton, South Africa
      • J-Ring, Narrow Gap, EN (UTC-0520E)

        J-Ring, Narrow Gap, EN (UTC-0520E)

        • Manufacturer: Labequip

        Fresh Concrete Testing Product Codes: Description: The J-Ring Test is used for determining the passing ability, the flow spread and the t500Jflow time of self-compacting concrete as the concrete flows through the...

        Alberton, South Africa
      • Lower and Upper Platens (UTC-4511)

        Lower and Upper Platens (UTC-4511)

        • Manufacturer: Labequip

        Compression Testing Frames Product Code: Descriptions: The platens enable the testing of a wide variety of cylinder, cube, blocks or similar specimens. Manufactured from high quality steel, which is then hardened...

        Alberton, South Africa
      • Universal Cutting Machines (UTC-1020)

        Universal Cutting Machines (UTC-1020)

        • Manufacturer: Labequip

        Hardened Concrete Testing Product Codes: Description: The UTC Series Universal Cutting Machine has been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens. Special cla...

        Alberton, South Africa
      • Beam Moulds (UTC-0830)

        Beam Moulds (UTC-0830)

        • Manufacturer: Labequip

        Hardened Concrete Testing Product Codes: Description: Steel beam moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Due to the continuous development of our prod...

        Alberton, South Africa
      • Digital Bond Strength /Pull-off Tester

        Digital Bond Strength /Pull-off Tester (UTC-3250)

          Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Description: 16 kN measurement capacity apparatus is used for determining of bond/pull-off strength of repair mortar, hardened renderin...

          Alberton, South Africa
        • Aggregate Crushing Value (ACV) Sets

          Aggregate Crushing Value (ACV) Sets (UTA-0630)

          • Manufacturer: Labequip

          Mechanical and Physical Properties Product Code: The Aggregate Crushing Value (ACV) Test Set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. E...

          Alberton, South Africa
        • Bleeding of Freshly Mixed Concrete

          Bleeding of Freshly Mixed Concrete (UTC-0720)

          • Manufacturer: Labequip

          Fresh Concrete Testing Description: UTC-0720 is used for determination of the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete. Due to the continuous development of our pr...

          Alberton, South Africa
        1213141516

        Overview

        Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

        FAQ

        What should I consider when buying materials testing equipment?

        Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

        How do I ensure the materials testing equipment is shipped safely?

        Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

        What is the maintenance schedule for materials testing equipment?

        Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.