New Processing in Veneto, Italy

IC SYSTEM Logic 120

• Manufacturer: FA.LCO. ASSISTANCE

Hopper size (cm): 180��102 | Dim. cylinder compat. (cm): 22��16 | No-load duty cycles: 3.9/m��� | Loaded work cycles: 3.5/m��� | Wash thrust at 320 bar (tons): 115 | Vertical wire feedthrough: 4 needles | Automa...

OMP Laser tube M3 2D/3D

• Manufacturer: O.M.P

Tube laser cutting system with fiber source, capable of processing tubes up to ø 230 mm and open and/or closed derived profiles. QUALITY AND PRICE MEET Round, square tubes, rectangles, special sections, open prof...

TEOREMA ÀNEMOS

COMBI TEOREMA

David Progress Sweet

• Manufacturer: David

Includes: 5 cm front door depth either single or double glass depending on oven size, Electronic control panel with 10 programs, Steamer Optional: 4.0 technology control panel, Economizer, Extractor hood, Leaveni...

ROTOR WIND

OMP 2D/3D tube laser machines from 20 to 600 mm in diameter

• Manufacturer: O.M.P

2D and 3D fiber laser cutting technology for tubes, bars and profiles, from 20 mm to 600 mm in diameter and derivatives up to 12,000 mm in length. CHOOSE YOUR LASER TUBE Round tubes, square, rectangles, special s...

Helvi PLASMA PC EVO 50.1

• Manufacturer: Helvi

Plasma cutters, based on Inverter technology, guaranteeing accurate and clean plasma cut. Easy to handle and operate, these systems are suitable for cutting materials at high speed. The available cutting modes ar...

Helvi PC EVO 70

• Manufacturer: Helvi

Input voltage: (3ph)  400V  50/60Hz | Power 60%: 8,9 KVA | Max input current: 22 A | No load voltage: 330 V | Amp min-max: 20 ÷ 70 A | Duty cycle 40°: 70A @ 50% 65A @ 60% 50A @ 100% | Clean cut 25 cm/min: 25 mm ...

Helvi PC EVO 100

• Manufacturer: Helvi

Input voltage: (3ph)  400V  50/60Hz | Power 60%: 14,2 KVA | Max input current: 22 A | No load voltage: 320 V | Amp min-max: 20 ÷ 100 A | Duty cycle 40°: 100A @ 35% 70A @ 60% 60A @ 100% | Clean cut 25 cm/min: 35 ...

Breton Hydra

• Manufacturer: Breton

Breton Hydra: a 5-axis waterjet cutting center featuring an ultra-compact head, designed for precise and complex cuts on any material. Breton Hydra is a 5-axis waterjet cutting center designed for processing nat...

Thermal cutting

Electrostatic separator for plastic-plastic fractions hamos EKS

Hard-to-separate plastic blends: Polystyrene (PS) and Acrylonitrile Butadiene Styrene (ABS) Polyvinyl chloride (PVC) and rubber High-density polyethylene (HDPE) and polypropylene (PP) Polyethylene terephthalate (...

ELECTROSTATIC SEPARATOR METAL - PLASTIC KWS

Copper cable scrap Electronic waste Crushing dust Aluminum mesh Photovoltaic panels Precious and non-ferrous metals Conductive materials such as wood, cardboard, or conductive rubber Automotive scrap residues Dry...

Plastic drain sieve