Used Materials Testing in Gauteng, South Africa

Deformation of frames (SE 110.20)

• Manufacturer: Labequip

principle of virtual work to calculate the deformation and support reaction in a statically indeterminate system Description: A frame is a bent beam with rigid corners which creates a so-called structure gauge. T...

Hertzian pressure (TM 262)

• Manufacturer: Labequip

demonstration of the contact area under Hertzian pressure Description: When two bodies with a convex surface are pressed against each other, ideally, these bodies only come into contact linearly or at one or more...

Triaxial Cells (UTS-2400)

• Manufacturer: Labequip

Soil Mechanics The cell has been designed and treated to minimize corrosion. Particular attention has been paid to the quality of finish between the piston and the head. Final assembly includes the fitting of an ...

Semi-Automatic Penetrometer for Liquid Limit (UTS-0180)

Soil Classification Penetration cone/s, cone test gauge and sample cups should be ordered separately. A Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liq...

Hoek Triaxial Cell (UTR-0455)

Strength and Deformability Tests Product Codes: Description: Hoek Cells comprise a steel body complete with two quick release self-sealing couplings for oil inlet and outlet, two steel hollow end caps which are s...

Fully Automatic Electronic Bitumen Penetrometer (UTB-0130)

Bitumen and Bituminous Binders Product codes: UTB-0130 Fully Automatic Electronic Bitumen Penetrometer with automatic surface detection is used for determination of the needle penetration according to EN 1426, AS...

Structural Systems

• Manufacturer: UTEST

Description: UTEST became leading testing equipment supplier in Turkey and aims to maintain highest product standard in the world with continuous research and development activities. UTEST manufactures Electromec...

Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

• Manufacturer: UTEST

Product Code: Any machine having different capacities and features is available upon request Description: UTSP-0190, 0192, 0194, 0196 models with outer diameters from 200 mm up to 2900 mm, UTSP-0200, 0202, 0204, ...

Compression and Flexural Frames (UTCM-3722)

• Manufacturer: Labequip

Compression and Flexural Machines Product Code: Description: The UTCM-3722 and UTCM-3742, very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimen...

Linear Shrinkage Mould (UTS-0235)

• Manufacturer: Labequip

Soil Classification The UTS-0235, Linear Shrinkage Mould is 140 mm long and 12.5mm radius and is used for the determination of the total linear shrinkage of soils, and indicates the plastic properties of soils wi...

Flexural Frame U/C Type (UTC-5600)

• Manufacturer: UTEST

Compression and Flexural Testing Machines Product Codes: UTC-5600 200 kN Capacity Flexural Testing Frame U Type UTC-5700 300 kN Capacity Flexural Testing Frame C Type Description: The vers...

600 kN Capacity Flexural Frame Four Column Type (UTC-5660)

• Manufacturer: UTEST

Compression and Flexural Testing Machines Description: UTEST 600 kN capacity Flexural Frame is designed for minimum deflection at maximum load resulting in very high accuracy. The load frame is a four-column desi...

Mechanical Strain Gauge (UTC-3110)

• Manufacturer: Labequip

Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Product Codes: UTC-3110 Mechanical Strain Gauge 100 mm Measuring Base UTC-3130 Mechanical Strain Gauge 300 mm Mea...

Deformation of curved-axis beams (FL 170)

• Manufacturer: Labequip

elastic deformation of curved-axis beams Description: In construction engineering, a distinction is made between beams and arches. An arch is a statically indeterminate supported structure with a curved axis and ...

Buckling of bars (SE 110.57)

• Manufacturer: Labequip

demonstration of buckling in bars Description: Long and slim components such as bars, beams and columns are often subjected to compressive forces along their long axis owing to their function. Under the influence...