Used Materials Testing in Gauteng, South Africa

FULLY-AUTOMATED PERMEABILITY SYSTEM (LoadTrac II, FlowTrac II)

• Manufacturer: Labequip

Advanced Soil Systems ASTM D-5084 – Flexible wall permeability ASTM D-2434 – Rigid wall permeability The LoadTrac II/FlowTrac II flow pump provides a unique and versatile way to run flexible wall permeability tes...

Lower and Upper Platens (UTC-4511)

• Manufacturer: Labequip

Compression Testing Frames Product Code: Descriptions: The platens enable the testing of a wide variety of cylinder, cube, blocks or similar specimens. Manufactured from high quality steel, which is then hardened...

Beam Moulds (UTC-0830)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: Steel beam moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Due to the continuous development of our prod...

Aggregate Crushing Value (ACV) Sets (UTA-0630)

• Manufacturer: Labequip

Mechanical and Physical Properties Product Code: The Aggregate Crushing Value (ACV) Test Set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. E...

Digital Rebar Pull-Out Force Tester (UTC-3190)

• Manufacturer: Labequip

Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Product Codes: Description: The Apparatus are used for determining the bond strength between anchored reinforcing steel bar (rebar) and...

Poker Vibrator (UTC-0928)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: The Poker Vibrator is ideal for the internal compaction of concrete specimens and a good alternative to traditional tamping bar, especially when there are lar...

Concrete Pocket Penetrometer (UTC-0715)

Fresh Concrete Testing Description: The UTC-0715 is designed for the determination of initial setting time of fresh concrete for field and laboratory use. Stainless steel plunger has 32.3 mm² (1/20 in²) area and ...

Cylinder Moulds (UTC-0842)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: Hard plastic and steel cylinder moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Two part and clamp attac...

Density (Unit Weight) Measure (UTC-0603E)

• Manufacturer: Labequip

Fresh Concrete Testing Product Codes: Description: Density (Unit Weight) Measures are used to determine the weight per cubic meter of freshly mixed and compacted concrete. Manufactured from heavy gauge steel comp...

Cube Moulds (UTC-0810)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: Cast iron and hard plastic moulds are manufactured in accordance with dimensions and tolerances stated in the relevant standard. Four-part body and attached t...

Length Change (Shrinkage And Expansion) (UTCM-0029E)

• Manufacturer: Labequip

Physical and Chemical Properties Product Code: Description: The moulds are used for preparing the specimens for the purpose of determining the length changes (shrinkage/expansion) in hardened hydraulic cement mor...

Small Curing Tanks (UTC-0965)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Descriptions: The UTC-0965 Steel and UTC-0970 Polyurethane Small Curing Tanks are designed for curing concrete cubes and cylinders. The temperature can be adjusted to the ...

Fundamentals of mechanical friction (TM200)

• Manufacturer: Labequip

stationary friction body, uniformly moving friction plate Description: The unit provides fundamental experiments on static and dynamic friction. Two solid bodies are moved against each other in a uniform manner. ...

FULLY-AUTOMATED CYCLIC TRIXIAL SYSTEM (LoadTrac II, FlowTrac II Cyclic)

• Manufacturer: Labequip

Advanced Soil Systems ASTM D-3999 Determination of the Modulus Properties ASTM D-5311 Load Controlled Cyclic Triaxial Testing of Soils The LoadTrac II/FlowTrac II Cyclic system automated test unit completely auto...

Micro-Deval Apparatus ASTM (UTA-0620A-T)

• Manufacturer: Labequip

Mechanical and Physical Properties Product Code: The Micro Deval Testing Machine is used to determine the resistance to wear of aggregates. The machine consists of a steel frame, two stainless steel jar stainless...