Used Agitators in Germany

WOLF Agitator Tank

• Manufacturer: Wolf

Agitator containers of type RB basically consist of a double-walled container, which is generally heated with hot water, and an agitator that keeps the mass moving steadily. The movement facilitates the exchange ...

300 liter agitator tank (powder mixer), Aisi 316 with propeller agitator

remarks: Manhole diameter approx. 410 mm; Support ring and plate on the outside of the lower bottom made of Fe; Grayish protective coating on the outside

Mobile agitator tank WOLF

• Manufacturer: Wolf

The jacket and bottom of the tanks are double-walled, designed for hot water heating. The top cover of the container is divided, one half is designed as a hinged lid. A limit switch stops the agitator as soon as ...

various agitator

• Manufacturer: various

Stainless steel container with agitator for mixing jam with water Area of application: mix jam with water Measuring range: 1. Jam fill level probe 2. Level of water Working method: Then fill in jam up to the 1st ...

16000 liter agitator tank, Aisi 304 with jet stream mixer

remarks: Manhole approx. 320 x 420 mm; 1 tanks with smaller dents, 2 tanks with strong dents (1 with small cracks in one of the dents); height-adjustable screws of the feet are partially missing agitator features...

2300 liter agitator tank, Aisi 304 with jet stream mixer

remarks: 3-legged frame, Aisi 304; outlet fitting incomplete; 3 load cells (no guarantee of functionality) are included in the scope of delivery

7500 liter agitator tank with jet stream mixer, Aisi 304

remarks: The feet have been cut off and are delivered separately, please look closely at the photos.

3000 liter heat-coolable agitator tank, Aisi 316 with jet stream mixer

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, 1.4301 (Aisi 304); 1 cut connection in the lid (see photos) agitator features: Jet stream mixer, ...

22000 liter agitator tank with side-mounted propeller mixer, Aisi 304

remarks: Tank with dents; 1 foot is pressed into the lower bottom (see photos)

Agitator tank 0.8 cbm

• Manufacturer: Sielmann

Design: cylindrical, suspended on support ring with upper flat base, flanged and lower curved base. Disc agitator from above and side, 1.2/2.2 kW, 710/1,440 rpm. Connections: 1 opening 350 x 400 mm with hinged li...

Agitator tank 18 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 5 feet, height-adjustable, open at the top, with 200 mm reinforcement rim, with lower conical base, with cross member for inclined blade agitator, eccentric from above, approx. 2....

Agitator tank 3.5 cbm

• Manufacturer: Sielmann

Design: cylindrical, suspended on 3 supports with a dished top and a conical bottom. Agitator from the top center. Dissolver with 2 wall scrapers and 1 bottom scraper, 90 kW, 145 rpm. Connections: 1 hinged cover ...

Agitator tank 13 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, with curved bottoms, inclined blade agitator from the top center, 4 kW, approx. 40 rpm, with bottom bearing, internal pipe coil on the cylinder and lower bottom, operating...

Agitator tank 7 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, with curved bases. Grid agitator from the top center, 7.5 kW, approx. 40 rpm. Double jacket around cylinder and lower base for pressureless heating/cooling. Insulation aro...

Agitator tank 0.5 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on three feet with conical bases. Eccentric agitator from above. Anchor stirrer 1.1 kW, 32 rpm. Double jacket around the cylinder and lower base for pressureless heating and cooling....