Used Agitators in Bremen, Germany

300 liter agitator tank (powder mixer), Aisi 316 with propeller agitator

remarks: Manhole diameter approx. 410 mm; Support ring and plate on the outside of the lower bottom made of Fe; Grayish protective coating on the outside

16000 liter agitator tank, Aisi 304 with jet stream mixer

remarks: Manhole approx. 320 x 420 mm; 1 tanks with smaller dents, 2 tanks with strong dents (1 with small cracks in one of the dents); height-adjustable screws of the feet are partially missing agitator features...

7500 liter agitator tank with jet stream mixer, Aisi 304

remarks: The feet have been cut off and are delivered separately, please look closely at the photos.

2300 liter agitator tank, Aisi 304 with jet stream mixer

remarks: 3-legged frame, Aisi 304; outlet fitting incomplete; 3 load cells (no guarantee of functionality) are included in the scope of delivery

22000 liter agitator tank with side-mounted propeller mixer, Aisi 304

remarks: Tank with dents; 1 foot is pressed into the lower bottom (see photos)

3000 liter heat-coolable agitator tank, Aisi 316 with jet stream mixer

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, 1.4301 (Aisi 304); 1 cut connection in the lid (see photos) agitator features: Jet stream mixer, ...

200 liter heat-/coolable agitator tank, Aisi 316 with jet stream mixer

• Manufacturer: F. Widmann & Sohn

max. allowable working temperature: 100 °C max. allowable working overpressure (dj): 4.0 bar max. allowable working temperature (dj): 151 °C Temperature control cylinder (dj): double jacket temperature control bo...

6100 liter heat-/coolable agitator tank, Aisi 316 with jet stream mixer

max. allowable working temperature: 80 °C max. allowable working temperature (dj): 80 °C Temperature control cylinder (dj): double jacket remarks: Insulation only around the cylindrical part of the tank; flanged ...

17300 liter agitator tank, Aisi 304n with ex-proof 27 kW blade mixer

• Manufacturer: Hagemann

max. allowable working temperature: 100 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: 1 tank (internal no. 7081-3) with a smaller dent and a trimmed connectio...

Agitator tank 18 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 5 feet, height-adjustable, open at the top, with 200 mm reinforcement rim, with lower conical base, with cross member for inclined blade agitator, eccentric from above, approx. 2....

Agitator tank 13 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, with curved bottoms, inclined blade agitator from the top center, 4 kW, approx. 40 rpm, with bottom bearing, internal pipe coil on the cylinder and lower bottom, operating...

Agitator tank 7 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, with curved bases. Grid agitator from the top center, 7.5 kW, approx. 40 rpm. Double jacket around cylinder and lower base for pressureless heating/cooling. Insulation aro...

Agitator tank 22 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with bracing, with conical bottoms, propeller agitator from above, eccentric, 3.7 kW, 470 rpm, insulation around the cylinder and lower base, fully weld...

Agitator tank 1 cbm

• Manufacturer: Sielmann

Operating data: According to the nameplate, designed for 0.5 bar operating pressure. Design: Cylinder, standing on 4 feet, with conical bottoms. Agitator from above, 2x Z-stirrers, 1.5 kW, 64 rpm. Half-pipe coil ...

Agitator tank 1.8 cbm

• Manufacturer: Sielmann

Design: Cylindrical suspended on 4 iron claws with a flat upper end, flanged, and a lower end with a dished end. Anchor agitator mounted from the top center, 1.1 kW, 25 rpm, with baffle. Double jacket around the ...