Used Riveting Machines in Germany

Blind riveting gun from GESIPA - PowerBird 20557

• Manufacturer: GESIPA

Battery riveting tool, blind rivet gun, blind rivets -transfer in as-is condition as inspected -the device works, the batteries are defective

1999 Hydraulic Lockbolt Rivet Gun from Hydro Control - Lockbolt Setter 18915

• Manufacturer: Hydro Control

hydraulic Lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic Lockbolt rivet gun

TOX- Full Punch Riveting System with Robot Tongs Riveting Tongs Type: TZ-VSN Riveting System

• Manufacturer: TOX

TOX Type: TZ-VSN TOX solid self-pierce riveting system The solid self-pierce rivet first cuts through all joining partners and presses the punched slug out of the joint. With the innovative technology for self-pi...

TOX- Full Punch Riveting System without Robot Tongs Type: TZ-VSN Riveting System

• Manufacturer: TOX

TOX Type: TZ-VSN TOX solid self-pierce riveting system The solid self-pierce rivet first cuts through all joining partners and presses the punched slug out of the joint. With the innovative technology for self-pi...

Nimak Tucker combination robot welding gun MF180 + punch riveter C-frame

• Manufacturer: Nimak

Tucker Nimak MF180: Robot welding guns for single-sided resistance spot welding The robotic welding guns for single-sided resistance spot welding from NIMAK work with state-of-the-art medium-frequency transformer...

2006 Torque assembly station by UWE TANK - HI-LOK assembly 25668

• Manufacturer: UWE TANK

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun,

Riveting/Stud welding device STAMOS S-STUD 1600

Riveting/Stud welding device STAMOS S-STUD 1600, 230 V, w/ small transport cart

1980 NATIONAL 51

• Manufacturer: National

Info: semi tubular rivets | Diameter range: 5 mm | Shaft length under head: 40 mm | Max. cut-off length: 60 mm | Output pieces/min: 470

1980 NATIONAL 51

• Manufacturer: National

Info: semi tubular rivets | Diameter range: 5 mm | Shaft length under head: 40 mm | Max. cut-off length: 60 mm | Output pieces/min: 470

1984 NATIONAL 3/16 Rlvitheader

• Manufacturer: National

Diameter range: 5mm | Shaft length under head: 25 mm | Output pieces/min: 225

1980 NATIONAL 51

• Manufacturer: National

Info: semi tubular rivets | Diameter range: 5 mm | Shaft length under head: 40 mm | Max. cut-off length: 60 mm | Output pieces/min: 470

Rivet heating system BTEV-KLEMOTA NoZG, 2 pieces

• Manufacturer: BITEV-KLEMOTA

Additional Information 2 used, well-maintained rivet heating systems. Mobile, with a pneumatic lifting cylinder in the lower section and a complete electrical and pneumatic control system, and heating chambers in...

Pneumatic Rivet Gun

Including case

ANT KJ-40 Pneumatic Lifting Riveter

Including case

2024 ANT DLHN-KJ60 Air Lift Riveter

M3-M6, with accessories in the transport case