Used Presses in Saxony, Germany

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke length: 25 millimeter

Hand screw press Thrust: probably approx. 6000 kg | Table surface: 390 x 250 mm | Spindle diameter: Ø 40 mm | Ram stroke max: 25 mm | Removal table plunger: 55 mm | Discharge: 100 mm | Dimensions: 440 x 390 x 510...

HSV hand lever press

Hand lever press, mandrel press, rotary mandrel press HSV, SCHÄFER MASCHINEN- UND ANLAGENBAU Type H3 Table diameter: Ø 70 mm, tool holder: Ø 12 mm with adapter: Ø 20 mm, length: 66 mm, tool holder: Ø 8 mm Plunger...

PAGUS manual spindle press

• Manufacturer: Pagus

Manual spindle press used, tested ! Pressure performance: 10 t | Passage between the stands: 450 mm | Installation height: 300 mm | Wheel inner diameter: Ø 1500 mm | Table size: 450 x 400 mm | Space needed: 1.400...

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke length: 230 millimeter

Manual screw press, without swing arm PAGUS used, tested !

PRESSTA EISELE corner joint press

• Manufacturer: Eisele
• Stroke length: 20 millimeter

Corner joint press PRESSTA EISELE PV 8 Backstop stroke. 100 mm with accessories ! used, tested !

FUTTERS hand lever press

Hand lever press, mandrel press, rotary mandrel press FUTTERS ( LONDON ) LIMITED. No 900-0000 Table: 60 x 81 mm, tool holder: Ø 38 mm ram diameter: Ø 32 mm, tool holder: Ø 18 mm used, checked !

PAGUS hand lever press

• Manufacturer: Pagus

Hand lever press, mandrel press, rotary mandrel press PAGUS Table: 220 x 90 mm, with U-hole: Ø 30 mm, length: 45 mm Mounted table: 105 x 40 mm, height: 20 mm, with hole: Ø 14 mm, continuous ram diameter: Ø 40 mm,...

METALWAG manual screw press

Manual spindle press, Balance METALWAG YB-1 press stamp is missing ! used, checked !

HSV hand lever press

Hand lever press, mandrel press, rotary mandrel press HSV, SCHÄFER MASCHINEN- UND ANLAGENBAU Table 1: 153 x 133 mm, bore: Ø 42 mm Groove width: 12 / 20 mm, groove depth: 24 mm Table 2: 150 x 107 mm, tool holder: ...

PAGUS manual spindle press

• Manufacturer: Pagus

motores Hub: max. 59 mm ( after removing the limiting sleeve ) | Discharge: 60 mm | Distance ( table - tool holder ): 90 mm | Dimensions ( ready for use ): 290 x 160 x 380 mm

BOSCH Electric press

• Manufacturer: Bosch

Electric press BOSCH 0 608 750 049 with transducer, terminal box and cable 0 608 600 001 0 608 701 014 0 608 870 347 3 607 021 015

PAGUS pressing and punching device

• Manufacturer: Pagus
• Stroke length: 45 millimeter

Pressing and punching device, hydraulic PAGUS KX12-1B used, tested !

PSP POHONY multi-disc brake

Multi-disc brake, Brake PSP POHONY ELB 6.3 24V CSN 02 6573 ( ČSN 02 6573 ) 5 clutch disks New !

ZAECKEL & ACHENBACH Hole punch

• Manufacturer: Achenbach
• Stroke length: 10 millimeter

Hole punch, hand lever hole punch ZAECKEL & ACHENBACH used, tested !

SYKON long hole punch

• Stroke length: 20 millimeter

Long hole punch, hole punch, hand lever hole punch SYKON 2859 used, tested !