Used Presses in Saxony, Germany

1991 Luigart & Sohn EPy 40

• Manufacturer: Luigart & Sohn
• Stroke length: 300 millimeter
• Daylight: 450 millimeter

further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operatio...

WMW ZEULENRODA PYE 4081

• Manufacturer: Zeulenroda
• Stroke length: 500 millimeter
• Power requirement: 13 kilowatt

Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year

1960 WMW ZEULENRODA PYE 10

• Manufacturer: Zeulenroda
• Model: PYE 10
• Stroke length: 400 millimeter
• Daylight: 630 millimeter

This website uses cookies. By using and further navigating this website you accept this. Detailed information about the use of cookies on this website is available by clicking on .

1979 WMW BLEMA-GOTHA PEE II 250

• Manufacturer: Blema
• Model: PEE II 250
• Power requirement: 23 kilowatt

Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: ...

1997 Edelhoff HZP 160

• Manufacturer: Edelhoff
• Stroke length: 250 millimeter
• Power requirement: 15 kilowatt

The machine isn't installed yet. The pictures are from the origin location of the former owner. further details: - sideway passage W: 520 x H: 620mm - passage front side W:660mm x H: 600mm equipment: - walkable p...

1960 EITEL EP 30 S

• Manufacturer: Eitel
• Model: EP30-S
• Stroke length: 600 millimeter
• Daylight: 600 millimeter

- Machine control via foot pedal. - Speed adjustable via foot switch. Machine can be demonstrated under power. (Accident prevention regulations was valid until 2011)

1997 CLIFTON 505 D SPL APP

• Manufacturer: Clifton
• Stroke length: 400 millimeter
• Power requirement: 56 kilowatt

- control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and sa...

2010 Vetch

• Manufacturer: Wicke

Press-in and marking station The workpieces are processed using the following steps. Manually place the workpiece in the holder and secure it with a clamping lever. Manually insert the notched pin into the mandre...

VEB Bad SALZUNGEN MAR 125/2

• Manufacturer: VEB Bad SALZUNGEN

ex Works, loaded free, truck plate width 125 mm plate thickness 2 mm straightening feed 5-30 m/min total power requirement 1,5 kW weight of the machine ca. 460 kg dimensions of the machine ca. m

WMW Press

• Manufacturer: WMW

Hydraulic press WMW ZEULENRODA PYE 10x250 Total power requirement: 1.6 kW Machine weight approx: 1,1 t Space requirement approx: 1100 x 650 x 2050 mm Installation height: 500 mm Table size: 400 x 450 mm

PAGUS hand lever press

• Manufacturer: Pagus

Hand lever press, mandrel press, rotary mandrel press PAGUS Table diameter: Ø 41 mm, tool holder: Ø 14 mm ram diameter: Ø 19 mm, tool holder: Ø 6.0 mm various accessories used, tested !

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke length: 25 millimeter

Hand screw press Thrust: probably approx. 6000 kg | Table surface: 390 x 250 mm | Spindle diameter: Ø 40 mm | Ram stroke max: 25 mm | Removal table plunger: 55 mm | Discharge: 100 mm | Dimensions: 440 x 390 x 510...

HSV hand lever press

Hand lever press, mandrel press, rotary mandrel press HSV, SCHÄFER MASCHINEN- UND ANLAGENBAU Type H3 Table diameter: Ø 70 mm, tool holder: Ø 12 mm with adapter: Ø 20 mm, length: 66 mm, tool holder: Ø 8 mm Plunger...

PAGUS manual spindle press

• Manufacturer: Pagus

Manual spindle press used, tested ! Pressure performance: 10 t | Passage between the stands: 450 mm | Installation height: 300 mm | Wheel inner diameter: Ø 1500 mm | Table size: 450 x 400 mm | Space needed: 1.400...

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke length: 230 millimeter

Manual screw press, without swing arm PAGUS used, tested !