Used Injection Molding in Germany

Sodick GL30-LP
- Manufacturer: Sodick
Every Sodick injection molding machine is equipped with a two-stage piston injection system (V-LINE® system) based on three key principles: uniform plasticizing heat profile, constant fill volume and constant hol...
Düsseldorf, Germany
Sodick MS100
- Manufacturer: Sodick
Every Sodick injection molding machine is equipped with a two-stage piston injection system (V-LINE® system) based on three key principles: uniform plasticizing heat profile, constant fill volume and constant hol...
Düsseldorf, Germany
2005 Demag 200/580-840 Extra with robot
- Manufacturer: Demag
Robot Notches 1 Control: NC 4 | Clamping force t: 200 | Opening stroke mm: 575 | Distance between tie bars mm: 580x580 | Installation height min / max mm: 340/690 | Mold fixing platen size h x v: 860x860 | Screw ...
Mülheim, Germany
1999 Krauss Maffei KM 180-1000 C3, Akku
- Manufacturer: Krauss-Maffei
- Model: KM180-1000C3
new pump 2013 EUROMAP12 battery pack Control: MC 4 | Clamping force t: 180 | Opening stroke mm: 700 | Distance between tie bars mm: 560 x 560 | Installation height min / max mm: 600 | Mold fixing platen size h x ...
Mülheim, Germany
1999 Krauss Maffei KM 450-3500 C3 , Accu
- Manufacturer: Krauss-Maffei
C3 Systems Euromap 12 interface Accu Control: MC4 | Clamping force t: 450 | Opening stroke mm: 1170 | Distance between tie bars mm: 900 x 800 | Installation height min / max mm: 480 | Mold fixing platen size h x ...
Mülheim, Germany
1998 Krauss Maffei KM 500-2700 C1, with Sepro Robot
- Manufacturer: Krauss-Maffei
The coupling Engine - Pumpdrive is new Euromap 12 Seprorobot 3041 BZ S900-II
Mülheim, Germany
2004 Krauss Maffei KM 2300/12000 MC
- Manufacturer: Krauss-Maffei
Robot System Core pulls Heating channel controller
Mülheim, Germany
1997 Battenfeld BA 6500/2800 HM
- Manufacturer: Battenfeld
2 compartment core pull Euromap 12 Bi metal cylinder
Mülheim, Germany
2000 Krauss Maffei KM 200-700C1
- Manufacturer: Krauss-Maffei
- Core pull 2-fold Hydraulic - Mold nozzle control Pneumatic - Mold heating 8 control loops - 2 times WZ temperature monitoring - 4-fold Kistler charge amplifier - Blow out valve
Mülheim, Germany
2000 Krauss Maffei KM 280-1400 C3 Akku
- Manufacturer: Krauss-Maffei
- Model: KM280-1400C3
1 core train Euromap12, rechargeable battery Control: MC4 | Clamping force t: 280 | Opening stroke mm: 820 | Distance between tie bars mm: 630 x 630 | Installation height min / max mm: 330 | Mold fixing platen si...
Mülheim, Germany
1999 KRAUSS-MAFFEI KM 180-1000 C3
- Manufacturer: Krauss-Maffei
- Model: KM180-1000C3
Control type: conventional | Storage location: 45473, Mülheim on the Ruhr | Freight basis: in stock | Currency: EUR | Control: MC 4 | Closing force: 1800 kN | Screw diameter: 55 mm | Spray volume: 523 cc | Dimen...
Hamburg, Germany
1999 KRAUSS-MAFFEI KM 450-3500 C3
- Manufacturer: Krauss-Maffei
- Model: KM 450-3500 C3
Control type: conventional | Storage location: 45473, Mülheim on the Ruhr | Freight basis: in stock | Currency: EUR | Control: MC 4 | Screw diameter: 80 mm | Closing force: 4500 kN | Machine weight approx.: 26.0...
Hamburg, Germany
1997 DEMAG Ergotech pro 50-270
- Manufacturer: Demag
- Model: Ergotech
Clamping force: 50 ton | Opening stroke: 400 mm | Distance between tie bars: 355 x 355 mm | Mould height min.: 210 mm | Platen size (h x v): 540 x 540 mm | Screw diameter: 35 mm | Injection volume: 106 cm³ | Sho...
Mülheim, Germany
1997 DEMAG ERGOtech system 350-80
- Manufacturer: Demag
- Model: Ergotech
Clamping force: 35 ton | Opening stroke: 350 mm | Distance between tie bars: 320 x 320 mm | Mould height min.: 180 mm | Platen size (h x v): 460 x 450 mm | Screw diameter: 18 mm | Injection volume: 23 cm³ | Shot...
Mülheim, Germany
2001 ENGEL ES 1350H 200W / 300HL-2F
- Manufacturer: Engel
- Model: ES 1350
Clamping force: 300 ton | Opening stroke: 855 mm | Platen size (h x v): 1050 x 650 mm | Screw diameter: 60 +35 mm | Injection volume: 735 +135 cm³ | Shot weight: 662 + 122 g | Injection pressure: 1834 +1620 bar ...
Mülheim, Germany
Arburg Allrounder 720 Injection Molding
- Manufacturer: Arburg
- Model: Allrounder 720
Good condition Arburg Allrounder 720 Injection Moldings manufactured in 2007. Located in Denmark and other countries. Click request price for more information.
Denmark