Used Injection Molding in Germany

2010 Engel 500/120 spex

• Manufacturer: Engel

Length: 4.820 mm | Width: 1.480 mm | Height: 2.010 mm | Weight: 6.800 kg | Force closing: 120 ton | Screw diameter: 40 mm | Passage x columns: 0 mm | Passage y columns: 0 mm | Injectable volume: 251 cm³ | Closin...

2007 ENGEL 1100T/7050

• Manufacturer: Engel

Injection: General: Options: Length: 10.600 mm | Width: 3.500 mm | Height: 2.700 mm | Weight: 39.000 kg | Force closing: 1,100 tons | Screw diameter: 120 mm | Passage x columns: 1.400 mm | Passage y columns: 1.15...

2016 Engel E-Motion 110 1023

• Manufacturer: Engel
• Model: E-motion

Clamping force: 110 | Snail: 35 | Snail armored: Armored | Spar width: 510 x 460 | Wz. installation min.: 150 | Wz. installation max.: 450 | Wz. opening min.: 400 | Injection pressure: 2400 | Shot volume: 168 | ...

2016 Dr. Boy 55 A DUROPLAST (only 7,278 h)

• Manufacturer: Boy
• Model: 55 A

DUROPLAST granulate injection unit, single core pull control, blow-out device, preparation for 4-cavity mold heating, etc...

2012 ARBURG A 375 V 500-170 Rotary table

• Manufacturer: Arburg

Vertical spraying machine with 900mm turntable, rotation angle left / right 180°, incl. horizontal position device for spraying into the parting line incl. scissor lift table and plates for intervention protectio...

2014 ARBURG A 1500 T 1600-400 rotary table (29,279 h)

• Manufacturer: Arburg

1500mm table diameter, 2-station (180°) rotary table, 4-fold core pull, blow-out device, interface for inking unit, interface for HHG etc...

2010 ENGEL victory 200/50 Spex er/usp (24,500 h)

• Manufacturer: Engel
• Model: Victory

incl. er/usp sprue picker, air valve etc... Operating hours: 24,500 hours | Snail: 25 mm | Injection pressure: 2090 bar | Displacement: 69 cm³ | Closing force: 50 t | Tie bar spacing: 500 x 450 mm | Form installa...

Demag / Sigmatek Ergotech IBDED NCIV Farb V1.0 885 611 65

• Manufacturer: Demag
• Model: Ergotech

Description: Symbolfoto

2001 Demag Ergotech ET 50- 120 H system 997

• Manufacturer: Demag
• Model: System

Clamping force: 50 | Snail: 25 | Wz. installation min.: 252 | Wz. opening min.: 550 | Injection pressure: 2000 | Shot volume: 61 | Bullet weight: 54 | Maximum weight: 3,5 | Length: 3,2 | Width: 1,35 | Height: ~2...

Demag / Sigmatek Ergotech IBED NCIV SW 874 611 65

• Manufacturer: Demag
• Model: Ergotech

Description: Symbolfoto

Arburg injection molding machine 320 H-210-750

• Manufacturer: Arburg
• Model: 320-210-750

1 used injection molding machine ARBURG 320 H-210 - 750 function tested clamping force: 75 ton opening stroke max 375 mm mold installation height min 250 mm clamping platen distance : max 625 mm column distance 3...

Arburg injection molding machine 500-100-270 C

• Manufacturer: Arburg
• Model: Allrounder 270

1 used injection molding machine ARBURG 500-100 - Allrounder 270 C function tested clamping force: 50 ton opening stroke max. 350 mm mold installation height min. 200 mm clamping platen distance : max. 550 mm col...

Injection molds for PET-preforms + separate hotrunner

Hydraulic press (plastic injection molding), STANKO/ORENBURG, D2434A, A1620

• Manufacturer: Stanko

Hydraulic press model D2434A with a force of 2500 kN is designed to produce various shapes and sizes of products (both with and without reinforcement) from reactoplasts by direct (compression) and transfer pressi...

1998 Krauss Maffei KM 500-2700 C1, with Sepro Robot

• Manufacturer: Krauss-Maffei

The coupling Engine - Pumpdrive is new Euromap 12 Seprorobot 3041 BZ S900-II

Arburg Allrounder Injection Molding

• Manufacturer: Arburg
• Model: Allrounder

Good condition Arburg Allrounder Injection Moldings available between 1983 and 2018 years. Located in Slovakia and other countries. Click request price for more information.