Used Filter Presses

Cartridge And Candle Filter 0.7 m² (7.5 ft²) Stainless Steel Austenitic - IPP# 705877

• Manufacturer: Ultra filter

Additional Info:

Tower Filter 32 m² (344.4 ft²) Plastic - IPP# 204426

• Manufacturer: Larox/Hoesch

Manufactured by Larox/Hoesch Order # 610933/34 20 polypropylen and rubber membrane plates, 1/1,25 m³ cake capacity max cake thickness 35 mm CS and FRP coated frame rubber lines filter elements pipes Trovidur HT, ...

Pressure Leaf Filter Alloy Fab Stainless Steel 316 - IPP# 202194

• Manufacturer: Alloy Fab

500 Gallon Manufactured by Alloy Fab for Dartco Shell is .250" thick Top head is .312" thick Cone is .312/.437" thick jacket is .109" thick 6.5 turns half pipe on top head 18 turns half pipe on straight side 5 tu...

Cartridge And Candle Filter 16.5 m² (178 ft²) Hastelloy - - IPP# 209487

Filterite Filter Horizontal Type 267MSQH3-Hast C-3FD-375 Tank is 30" diameter x 30" straight side one welded head one bolted dished head Takes thirty 30" or 40" cartridge filters.

Cartridge And Candle Filter 6 m² (64.6 ft²) Rubberlined - IPP# 200492

• Manufacturer: Dr. Mueller

Fundabac filter Filter shell 5 mm thick 369mm conical bottom 14 filter elements 82mm diameter x 1650 mm long made of polypropylene

Hastelloy - C276 Cogiem FFP-030-DFM Rosenmund and Cogiem Filter - IPP# 209158

• Manufacturer: Rosenmund

Filter interior is polished to a mirror polish (220 grit) With cored and heated shaft shaft rated for 87 psi at 208 degrees F. Hydraulic driven agitator rotation 1:14 from 6-58 rpm. With stuffing box agitator sea...

Pressure Leaf Filter 7 m² (75 ft²) Stainless Steel 304 - IPP# 95688

• Manufacturer: Niagara

CS jkt (18) vert filter plates Swing bolt dish top 141" thick. 1-6" center btm outlet

Pressure Leaf Filter 9.5 m² (102.3 ft²) Stainless Steel Austenitic - IPP# 231026

• Manufacturer: Schenk

Pressure leaf/plate filter Internal volume: 640 liters Internal pressure: -1/6 bar approx (20) 800mm diameter stainless steel internal horizontal filter plates manual screw press mechanism, davit assist for top c...

Pressure Leaf Filter 6 m² (65 ft²) Stainless Steel 316 - IPP# 94603

• Manufacturer: International Process Plants

Filtration resistance due to cake build-up on stationary filter plates is limited to specific controlled thickness by the wiping action of the blades attached to rotating discs in each stage 12-stages, 24-rotatin...

Pressure Leaf Filter 9.5 m² (102.3 ft²) Stainless Steel Austenitic - IPP# 231027

• Manufacturer: Schenk

Pressure leaf/plate filter Internal volume: 640 liters pressure -1/6 bar manual screw press mechanism, davit assist for top cover

Stainless Steel 316 Chemap AG (Swiss) Pressure Leaf Filter - IPP# 800276

• Manufacturer: Chemap AG (Swiss)

design pressure 5.69 bar @ -29/+60 deg C Shaft seal: Packed gland built to ASME V111 div 1

Stainless Steel 316 Stalwart international BPEFP Pressure Leaf Filter - IPP# 222032

• Manufacturer: International

vertical sparkler type filter cGMP rated and sanitary construction buff polished to a mirror finish Rated for 3.5 kg/cm2 With a cake holding capacity of 64 Liters 18" x 15. (15 plates) Main filter body bolts toge...

Stainless Steel 304 SCHORCH RA Funda Pressure Leaf Filter - IPP# 207194

• Manufacturer: Schorch

Stawag Funda pressure leaf filter 55°C to 65°C internal 1.5 m³ volume Voltage: 3~380A/660V Current: 11.4A/6.6A Number of plates: 18

Hastelloy - C22 Clad Rosenmund FML 250 Rosenmund and Cogiem Filter - IPP# 706865

• Manufacturer: Rosenmund

Agitated jacketed Rosenmund filter dryer Batch size 20 to 25kg internal design pressure 0.39 MPa (3.9 bar) + vacuum @ -20/170 degrees C (120 liter) coil jackets 0.6 MPa (6 bar) @ -20/170 degrees C (10 liter) inte...