Used Filter Presses

Stainless Steel Austenitic Nutsche Filter - IPP# 107498

• Manufacturer: Seitz-Werke

Stainless type is austenitic but close to 304. 120 Liter tank.

Used JWI/US Filter Model 1000G50-/16/32-20-40SN

• Manufacturer: JWI

Used JWI/US Filter Model 1000G50-/16/32-20-40SN. 40 cu ft Poly plate and frame press. 32 Gasketed Poly plates are 1000 X 1000 mm . Center feed with 4 corner discharge. Has air over hydraulics closing system. Equi...

Hastelloy - C276 Cogiem FFP-030-DFM Rosenmund and Cogiem Filter - IPP# 209158

• Manufacturer: Rosenmund

Filter interior is polished to a mirror polish (220 grit) With cored and heated shaft shaft rated for 87 psi at 208 degrees F. Hydraulic driven agitator rotation 1:14 from 6-58 rpm. With stuffing box agitator sea...

Pressure Leaf Filter 7 m² (75 ft²) Stainless Steel 304 - IPP# 95688

• Manufacturer: Niagara

CS jkt (18) vert filter plates Swing bolt dish top 141" thick. 1-6" center btm outlet

Pressure Leaf Filter 9.5 m² (102.3 ft²) Stainless Steel Austenitic - IPP# 231026

• Manufacturer: Schenk

Pressure leaf/plate filter Internal volume: 640 liters Internal pressure: -1/6 bar approx (20) 800mm diameter stainless steel internal horizontal filter plates manual screw press mechanism, davit assist for top c...

Pressure Leaf Filter 6 m² (65 ft²) Stainless Steel 316 - IPP# 94603

• Manufacturer: International Process Plants

Filtration resistance due to cake build-up on stationary filter plates is limited to specific controlled thickness by the wiping action of the blades attached to rotating discs in each stage 12-stages, 24-rotatin...

Pressure Leaf Filter 9.5 m² (102.3 ft²) Stainless Steel Austenitic - IPP# 231027

• Manufacturer: Schenk

Pressure leaf/plate filter Internal volume: 640 liters pressure -1/6 bar manual screw press mechanism, davit assist for top cover

Stainless Steel 304 Pressure Leaf Filter - IPP# 220169

Cake Discharge: Dry, suitable for direct or pre-coat filtration Number of Filter Screens: 22 445 gallon 20 HP 3/60/230/460 volt Additional Features: Includes a spare filter plate pack.

Stainless Steel 316 Pressure Leaf Filter - IPP# 241128

• Manufacturer: Sparkler

pressure filter

Pressure Leaf Filter Stainless Steel 304 - IPP# 204104

70 ltr pressure filter Centrifugal discharge packing gland on shaft Motor: 220/480 V

Pressure Leaf Filter Stainless Steel 316 - IPP# 220995

Plate pack for a pressure filter Plates stamped # 2229. Seven plates plus a scavenger. With holders and rods.

Cartridge And Candle Filter Stainless Steel Austenitic - IPP# 222986

• Manufacturer: Pall

Pall filter pressure rated 10 bar @ -10/+140 degrees C (7) candles,

Hastelloy - C22 Rosenmund and Cogiem Filter - IPP# 230453

• Manufacturer: Rosenmund

Agitated Pressure Filter The 24.5 Liter vessel is rated -1/6 Bar @ -20 to 200 degree C The 2.7 Liter jacket is rated -1/6 Bar @ -20 to 200 degree C. The .3 Liter Heated Base is rated -1/6 Bar @ -20 to 200 degree ...

Pressure Leaf Filter Durco 36VH77 Stainless Steel 316 - IPP# 92529

• Manufacturer: Durco

Manufactured by Durco Enzinger Vertical tank horizontal Plate design, with wet cake discharge, with Slucing bar SS bolt on plate coil jacket on bottom head with bolted dished bottom with swing bolts Mounted on to...

Stainless Steel 321 Schenk ZHF-S80 Pressure Leaf Filter - IPP# 208456

• Manufacturer: Schenck

vessel volume 5250 liter approx 1.6m diameter x 1.6mm straight side vertical chamber, approx 300mm discharge, mounted on (3) stainless steel legs, associated equipment includes 1 x 3000 liter vertical stainless s...