Used Extruders

PARKER HANNIFIN/ZENITH MFG 5 HP 12582

• Manufacturer: Parker Hannifin

Parker Hannifin / Zenith Manufacturing 5HP melt pump model 60-20000-1550-4. Manufactured 4-23-99. Mounted on a stand. Five (5) zone heater controls. Last used on a 3.5″ extruder. 5HP 230/460-Volt 1,755 RPM motor....

EXTEK HSC-35 3.5″ SCREEN CHANGER 18361

One (1) used Extek model EH-35 screen changer having two (2) nominal 3.5″ breaker plates. S/N EH35161. Set up for use on a 3.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never...

EXTEK HSC-35 3.5″ SCREEN CHANGER 18362

One (1) used Extek model EH-35 screen changer having two (2) nominal 3.5″ breaker plates. S/N EH35160. Set up for use on a 3.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never...

CLOEREN HD-75 9″ SHEET DIE 17439

Cloeren / Production Components model HD-75 9″ sheet die. Integral upper flexible lip and removable lower lip. Adjusting bolts on 1″ centers. Flex adjustment of 0.075″. Coat hanger manifold. Job number 0093-86. l...

EREMA PC1007T FILM RECLAMATION LINE 18886

• Manufacturer: Erema

2012 Erema model PC1007T film reclaim lineS/N P11/232. Rated at 350-430 kgs/hour on LDPE and LLDPE and 300 kgs/hour on HDPE. line consists of the following:Model FB6000/900 inclined cleated in-feed conveyor measu...

EDI UHRC-100 44″ SHEET DIE 17461

• Manufacturer: EDI

One (1) used Nordson/ Extrusion Dies Inc Model Ultra-100 heavy duty sheet die with a 44″ slot opening. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45 degree restricte...

KRYENBORG 4.5″ CONTINUOUS SCREEN CHANGER 18956

Used 4.5″ (121mm) Kryenborg continuous screen changer, model K-SWE-121, dual 4.5″ breaker plates, rated 200-500 kg/hr, on cart. With hydraulic pump

3.5″ STATIC MIXER 18860

Used 3.5″ static mixer. 24″ long. 10″ OD flanged and threaded with 3.5″ inlet and 2.5″ OD opening. 9″ OD flange with 2.5″ opening.

JOHNSON 54 X 8 PULL 18800

• Manufacturer: Johnson

Johnson roll pull roll stand. Two (2) 54″ x 8″ diameter rubber covered rolls. Rolls are driven by an approximate 10 HP D/C motor through a “Drive-All” four speed gearbox. Air actuated top pull roll.

STERLING 6005FD-EZAC 5 HP BLOWER 18773

• Manufacturer: Sterling

Sterling model 6005FD-EZAC blower. S/N 79380. Directly driven impeller by a 5 H 230/460-volt motor. Has hinged door for easy impeller change out. 6″ OD inlet and outlet with Kongskilde OK160 rolled flange weld a...

CLOEREN 70″ AUTOFLEX SHEET DIE 18753

One (1) Cloeren 70″ auto-flex sheet die. 1″ x 4″ back center feed entrance. S/N 77831-2129. Manufactured April, 2003.

DYNISCO EH-60 6″ SCREEN CHANGER 18751

• Manufacturer: Dynisco

One (1) Dynisco model EH-60 screen changer having two nominal 6″ diameter breaker plates.

MGB SL12 12″ SCREEN CHANGER 17616

21409-11 One (1) used MGB Model SC12 slide plate screen changer having two (2) nominal 12″ diameter breaker plates. Unit is mounted on a stand with casters supplying approximately a 42″ discharge height. Package ...

GLOUCESTER COOLING ROLL STACK 18352

One (1) used Gloucester heavy duty cooling and polishing stand having three (3) 55″ face x 24″ diameter chrome plated rolls mounted in a 45-degree angle arrangement for down stack operation at a 62″ center line h...

CLOEREN / PRODUCTION COMPONENTS 58″ 18338

One (1) used Cloeren / Production Components model Master-flex HD-40 sheet die with a 58″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex...