Used Extruders

EDI 38″ ULTRAFLEX H75 SHEET 18012

• Manufacturer: EDI

Extrusion Dies Inc. model Ultraflex H75 38″ sheet die. S/N 87-11441-1. 1-1/8″ diameter back center material entry. 480/1/60 heaters. No restrictor bar

CLOEREN 46″ HD-100 SHEET DIE 18011

Cloeren model HD-100 46″ sheet die. S/N 04-7722. 1.5″ diameter back center material entry. 13.3 Kw. 1258 Lbs. Manufactured 03/2004

EDI 58″ SHEET DIE 17815

• Manufacturer: EDI

One (1) used EDI / Nordson sheet die having a 58″ slot opening. Upper flexible lip with Fixed lower lip. Adjusting bolts on 1″ centers. 1 1/4″ end feed entrance. Mounted on a heavy- duty cart.

GLOUCESTER 60″ COOLING AND POLISHING 17811

One (1) used 60″ Gloucester model 2000SLA cooling and polishing stand having three (3) nominal 24″ diameter chrome plated rolls mounted in a 45-degree arrangement for down stack operation. Rolls are pneumatically...

CO-EX IN-FEED BLOCK 17045

Used co-ex infeed block, 3″ OD sheet die hole, 1.5″ OD die hole size.

CLOEREN 74″ SHEET DIE 16986

Cloeren heavy duty sheet die with a 74″ slot opening. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. Cloeren serial number 99-6075T-0...

NORDSON 36.5″ SHEET DIE 16977

• Manufacturer: Nordson

Extrusion die / Nordson sheet die having a 36.5″ slot opening. Upper flexible lip. Fixed lower lip. Adjusting bolts on 1″ centers. 3/4″ OD back center feed. Motor is 230V/1ph/60Hz. Last used on flexible PVC. Extr...

NORDSON 36.5″ SHEET DIE 16976

• Manufacturer: Nordson

Extrusion die / Nordson sheet die with a 36.5″ slot opening. Upper flexible lip with micro adjustment. Fixed lower lip. 3/4″ OD back center feed. Motor is 230V/1ph/60Hz. Machine was last used on flexible PVC. Ext...

8″ SCREEN CHANGER 16576

Unknown manufacture 8″ screen changer. Unit has a hydraulic cylinder but no valve controls. Unit is also missing the breaker plate/

BERINGER 8″ SCREEN CHANGER 16412

Beringer 8″ slide plate screen changer, no hydraulic pack.

46″ EDI SHEET DIE 16277

• Manufacturer: EDI

EDI 46″ SHEET DIE, S/N 90-13289-02-03, RE-WORKED 2003, 1.75″ REAR CENTER MATERIAL ENTRY

MELT PUMP FSHV5CA047-9 12727

Melt pump model FSHV5CA047-9. S/N 952256037- 0000100-001 10HP 480-Volt 1,750 RPM motor through a 20:1 gearbox rated for up to 17HP.

TEXTURED ROLL 4941

Textured roll, cored for cooling, 12″ diameter x 54″ wide.

CINCINNATI MILICRON (WELEX) 2 ROLL 6547

• Manufacturer: Cincinnati

Cincinatti Milicron 2 roll stack / laminator, no S/N. Two (2) chrome rolls 17.75″ diameter 34″ wide cored for cooling. Two (2) aluminum guide rolls. One (1) is 17.75″ diameter x 31″ wide, and one (1) is 8″ diamet...

PTI “S” WRAP 50″ PULL 6866

Used 50″ wide PTI model SWU “S” wrap pull roll assembly. Manufactured in September of 2006. Unit has two (2) 24″ OD x 50″ wide rubber pull rolls that are air cylinder actuated and independently driven with indivi...