Used Machine Tools in Massachusetts, USA

TK Pittsburgh Air Hammer

THERE IS NO GREATER VALUE IN AIR HAMMER Closes up to 16 Ga. Fast and Easy! THERE IS NO GREATER VALUE IN AIR HAMMER Built to exact specifications. Precision machined parts from cast steel and aluminum – heat treat...

APE (J&M) 3030 Mast

• Manufacturer: J&M

APE (J&M) Model 3030 Mast on John Deere 230LC This is a 27' long J&M 3030 mast with a 10' additional extension. The unit is currently on a 2003 John Deere 230LC excavator w/ 6,400 hrs. The mast and excavator were...

Duro Dyne LSU Advance Liner Sizer

• Manufacturer: Duro Dyne

Model-LSU- Liner Sizer 5ft

Spindle Anchors Perforated Base

Spindle Anchors easily install any type of insulation to air ducts, metal buildings, concrete foundations and even to the underside of wooden roofs. They are perforated to allow adhesive to lock the fastener in p...

Flagler Model “S” Cleat

• Manufacturer: Flagler

Standard with Boot Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling. Approx. 100 feet per minute. 5 HP 230/460/3/60/1800 RPM . Double Matched Vee Belt. Arc Welded S...

FLY PRO 5'X10' | 1500W - 6000W IPG | Fiber Laser Metal Sheet and Pipe Cutter Full Enclosure with Parallel Shuttle Table

• Manufacturer: BesCutter

Standarf working area: 10' x 5' (3050 x 1550 mm) | Optional working area: 13' x 6.5' (4000 x 2000 mm)/ 20' x 6.5' (6100 x 2050 mm)/ 26' x 6.5' (8000 x 2000 mm) | Optional laser wattage: 1500W/ 3000W/ 6000W | X- ...

U-422 Bolt-Together Floor Stand

Floor stand to mount the U-422 bending brake.

U-416 Bolt-Together Floor Stand

Floor stand to mount the U-416 bending brake.

TUBE Dragon 1.5KW - 2KW Fiber Laser Metal Tube Cutter

• Manufacturer: BesCutter

2014 Prima-Power Zaphiro - resonator only

• Manufacturer: Prima-Power

2014 Prima ZAPHIRO 4,000 watt laser resonator - Power Output 4000 Watts - Beam on Hours 6,181 - Machine Hours 14000 Specifications are preliminary, and subject to verification

2020 BODOR 5x10 Fiber Laser New 2020 P3015

• Manufacturer: BODOR 5x10 Fiber Laser New 2020

Preowned BODOR P - series fully enclosed 2kw Fiber Laser less than 100 hours of use 5x10 Cutting area with complete part enclosure and Shuttle system .25" 1/4 Mild steel Easy cutting Capacity Includes Dust co...

Amada Pega-358 Punch Machine

• Manufacturer: Amada
• Model: Pega-358

Good condition Amada Pega-358 Punch Machines available between 1996 and 2001 years. Located in USA and other countries. Click request price for more information.