Used Grinding Machines in Massachusetts, USA

Dayton 8" Dual Ended Bench Grinder

• Manufacturer: Dayton

Dayton 8" Dual Ended Bench Grinder 3/4 HP, 3450 RPM, 120/240 V, 5/8" Arbor

Dayton 8" Dual Ended Bench Grinder

• Manufacturer: Dayton

Dayton 8" Dual Ended Bench Grinder 3/4 HP, 3450 RPM, 120/240 V, 5/8" Arbor

Dayton 8" Dual Ended Bench Grinder

• Manufacturer: Dayton

Dayton 8" Dual Ended Bench Grinder 3/4 HP, 3450 RPM, 120/240 V, 5/8" Arbor

Dayton 8" Dual Ended Bench Grinder With Vacuum

• Manufacturer: Dayton

Dayton 8" Dual Ended Bench Grinder With Vacuum 3/4 HP, 3450 RPM, 120/240 V, 5/8" Arbor

Dayton 8" Dual Ended Bench Grinder

• Manufacturer: Dayton

Dayton 8" Dual Ended Bench Grinder 3/4 HP, 3450 RPM, 120/240 V, 5/8" Arbor

Dayton 8" Dual Ended Bench Grinder With Vacuum

• Manufacturer: Dayton

Dayton 8" Dual Ended Bench Grinder With Vacuum 3/4 HP, 3450 RPM, 120/240 V, 5/8" Arbor

Dayton 8" Dual Ended Bench Grinder

• Manufacturer: Dayton

Dayton 8" Dual Ended Bench Grinder 3/4 HP, 3450 RPM, 120/240 V, 5/8" Arbor

Dayton 8" Dual Ended Bench Grinder With Vacuum

• Manufacturer: Dayton

Dayton 8" Dual Ended Bench Grinder With Vacuum 3/4 HP, 3450 RPM, 120/240 V, 5/8" Arbor

MHT Mitsui MSG Series 6"×12" Surface Grinder

• Manufacturer: MHT

MHT Mitsui MSG Series 6"×12" Surface Grinder Horizontal Spindle, Walker Smart Chuck Control, 1.3 HP Spindle Motor, 7" Wheel, Ultra-Precision Hand Feeds, 0.0001" Increments

60" Blanchard No. 32-60 Rotary Surface Grinder, S/N 11844

• Manufacturer: Blanchard

60" Blanchard No. 32-60 Rotary Surface Grinder, 66" Diameter Chuck with 60" Diamete Magnetic Rings, 72" Swing, 24" Vertical Range, 32" Diameter Segmented Wheel, 100 HP Motor, 10,000 Lb. Max Workload, .004"–.080"/...

Gorton Cutter Grinder Tool No. 375-4 5/8" Capacity

Gorton Cutter Grinder Tool No. 375-4 5/8" Capacity, 6" Cup Wheel, Multi-Axis Adjustments, Precision Spindle

Norton 6x18 Automatic Surface Grinder with Mag Chuck Hydraulic

• Manufacturer: Norton

This is a Norton 6x18 Automatic Surface Grinder with Magnetic Chuck... this unit was running fine when removed from service. - Hydraulic - 2 axis automation, manual Z wheel - 220 / 440 volts 3 phase WSPT# LGD-0...

1954 Cincinnati No.1 Centerless Grinder

• Manufacturer: Cincinnati

Capacity w/ std thrufeed & infeed work rests: 0 – 1-1/2" | Diameter: . 7"min./9"max | Width: 4"max | Hole: 4" diam | Recessed both sides: 5-1/2" diam. x 5/8" | Grinding wheel motor: 7-1/2 Hp | Regulating wheel m...