Used Drilling Rigs

1995 CME 45C AUGER DRILL RIG #5358T

Manufactured 1995, fully refurbished, new 3 cylinder diesel engine (3 hours), new transmission, new cylinders, new pump, 1 winch, auto hammer, cathead, wiggle tail, all new LED lighting, mounted on 1995 Ford F800...

1995 MOBILE B47 AUGER DRILL RIG #619Tb

Manufactured 1995, Deutz ediesel engine, cathead, winch, hydraulic driven, Marooka carrier, no leaks, runs great Price: $87,500

BUCYRUS ERIE 22W SERIES I CABLE TOOL DRILL RIG #3284T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

4 cyl Hercules engine, mounted on 2002 GMC truck with Cat 3126 diesel engine, 6 speed transmission, 1200' of drill line and 1200' of sandline Price: $42,000 - Tennessee BUCYRUS ERIE 22W CABLE TOOL DRILL RIG

1999 CME 45C AUGER DRILL RIG #3298Tc

Manufactured 1999, 3 cyl 57 hp Duetz air cooled diesel engine, 2 winches, cathead, 140 # CME auto hammer, Moyno 3L6 pump, slide base, 300 gal water tank, front winch, toolbox mounted on 1995 Markooka MST 1100, 24...

1991 MOBILE B-57 AUGER DRILL RIG #8195T

Manufactured 1991, gas deck engine, 250 gal water tank, cathead, in/out and side to side slide base, no pump, no autohammer, mounted on 1995 Ford F700 single axle truck (not 4 x 4) with gas engine Price: $39,500

1999 BAYSHORE 2T SPEED DRILL RIG #9519T

• Manufacturer: Bay Shore

Manufactured 1999, 24’ max depth, Mounted on 1999 International 4800 4 x 4 truck, PTO, 210 HP DT466E engine, Allison automatic transmission, 9000 hours, 59,000 miles, one owner/operator, 6 augers (12-25”) Price: ...

CHICAGO PNEUMATIC T700 MAGNUM DRILL RIG #555Ti

• Manufacturer: Chicago Pneumatic

Built 1984, 1000/350 GHH compressor w/ Cummins KTA diesel engine, Detroit 60 Series 630 hp deck engine. The mast has been extended and the rig has been beefed up, 90,000 lb pullback, 20” table, mounted on Crane C...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #7315T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

Mounted on 1979 Ford Louisville truck with gas engine, 6 cylinder Hercules gas deck engine, 2 rear manual jacks, fully tooled (3” and larger), sitting since 2019, does not run Price: $16,500 - Illinois BUCYRUS ER...

1999 CASAGRANDE B130 HYDRAULIC DRILL RIG #4684Tb

• Manufacturer: Casagrande

Configured for CFA and rotary, year 1999, Cat 3116T diesel engine (104kw), approx 27,000 hours, max torque 108 kNm, mounted on Cat 320 on Sempirana tracks. CFA: 1000mm max diameter, 17.5m (12m + 6m kelly extensio...

CARDWELL KB750 DRILL RIG #3982T

• Manufacturer: Cardwell

Rated 8,500’ with 4-1/2” drill pipe, (1) Detroit 60 engine 14L 650hp, Cardwell 112’ x 300,000# mast, Century 17-1/2” x 44” rotary tble, Ideco 160 ton Block, King 150 ton swivel, Regan 10” 3000 psi annular BOP, tr...

2024 SOOSAN JD1400E-II

• Manufacturer: Soosan

2023 Year – JD1400EII Rock CommanderHandles a 14’ft lead rod and changes 12’ft thereafter. Carries 86’ft of drill steel onboard. New Features: Operator Comfort – Enlarged operators cabin with movable drill contro...

INGERSOLL-RAND ECM350

• Manufacturer: Ingersoll Rand
• Model: ECM-350
• Drilling depth: 4.356 meter
• Mast Height: 5.753 meter

2.5 – 3.5 Inch Class VL140 Drifter Comes with 3 Air Compressors This is a Complete Drill Package with 3 Ingersoll-Rand Portable Air Compressors

1973 PORTADRILL 10TL TOP HEAD DRIVE DRILL RIG #2916Tb

• Manufacturer: Portadrill

Manufactured 1973, top drive updated to a Foremost 5000 ft/lb torque head, standard 36’ mast can pull 30’ rods, but only makes connections with 20’ pipe, 3” plumbing, 2-1/2” swivel hose, 3 x 4 Mission mud pump, n...

SIMCO 2400 DRILL RIG #7055T

• Manufacturer: Simco

Freshly rebuilt 4-cylinder Wisconsin gas deck engine (rebuilt with approx 4 hours), 15’ mast, winch line, cathead, 1 speed drill head, new hydraulic pump, mounted on IC35 rubber tracked carrier with 3-cylinder De...

2007 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

Montabert HC200A Drifter – ‘0’ hours on fresh service CAT Engine Set up for 60mm drill steel Onboard Air of 480 CFM @ 150 PSI 5500 total frame hours 2012 percussion hours w/ ‘0’ hours on new service. PRICED TO SE...

Ingersoll Rand ECM-690 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: ECM-690

Good condition Ingersoll Rand ECM-690 Drilling Rigs manufactured in 1999. Located in USA and other countries. Click request price for more information.