Used Drilling Rigs

2007 ATLAS COPCO CM780D

• Manufacturer: Atlas-Copco
• Model: CM 780D
• Horsepower: 439.8552451407689 horsepower
• Drilling depth: 31 meter

DTH Class C-13 Cat Power 3.5” Drill Pipe 8961 frame/engine hours New Bean Pump-water injection New hose chain in 2016 New compressor oil cooler New windshield to be installed

2007 INGERSOLL-RAND CM780D

• Manufacturer: Ingersoll Rand
• Model: CM-780D
• Horsepower: 475 horsepower
• Drilling depth: 31.3944 meter

DTH Class C-13 Cat Power 3.5” Drill Pipe 8961 frame/engine hours New Bean Pump-water injection New hose chain in 2016 New compressor oil cooler New windshield to be installed

1990 CANTERRA CT-350 AUGER DRILL RIG #2596T

Manufactured 1990, auger has updated hydraulic pump for controls, long tower, 3 winches, including jib winch, sandline with rapid reverse (used to drive pipe into ground), 10,000 lb torque tophead, drillers platf...

FAILING 1500 DRILL RIG #2826T

• Manufacturer: Failing
• Model: 1500
• Gearbox type: Manual
• Mast Height: 0.9398 meter

FAILING 1500 DRILL RIG

2007 INGERSOLL-RAND ECM720

• Manufacturer: Ingersoll Rand
• Model: ECM-720
• Horsepower: 385 horsepower
• Drilling depth: 30 meter

4.5” – 5.5” Inch Class CAT C11 Diesel Engine HC200A Drifter set up for GT60 Rods Caterpillar C11 Diesel Engine Montabert HC200A drifter. Recent new hydraulic Pump Aprox. 11800 total frame hours Unit is set up for...

CABOT 750 DRILLING RIG #1125T

• Manufacturer: Franks Cabot

Cat 3412 engine with Allison 5860 transmission, 1-1/8 drilling line, 96’ x 300,000# derrick, mounted on 5 axle carrier, 4-sheave McKissick block, standpipe, kelly hose with sub and ramp, 27-1/2” rotary table Pric...

2012 #EDM 2000 SLIDING ANGLE MAST DRILL RIG 7472Td

Year 2012, mounted on 2012 International 7600 8x4 truck, Set up for exploration drilling (5-150 rpm tophead in low gear) AND core drilling applications (150-1,500 rpm tophead in high gear), Max tophead torque 9,0...

1998 INGERSOLL RAND T3W DRILL RIG #4877T

• Manufacturer: Ingersoll Rand
• Model: T3W
• Horsepower: 565 horsepower
• Hook load: 0.907184 tonne

Manufactured 1998, 900/350 air compressor (Brand new in 2018, approx 6,500 hours since), Cat 3406B deck engine (brand new 2018/19, approx 6,500 horus since ), 70,000# pullback, Atlas 1015 casign hammer (installed...

CHALLENGER 360 DRILL RIG #836T

Challenger 360 drawworks (500 HP) (rated to 6,500' with 4 1/2" drill pipe), (1) Series 60 12.7 liter 500 HP, Challenger 200 - 84' H - 300,000# SHL derrick,, 10' adjustable substructure, HT - 18" x 44" rotary tabl...

1985 CME 45B AUGER DRILL RIG #2347T

(Rig has been modified to a CME 55), manufactured 1985, new diesel deck engine (less than 200 hours), mounted on rubber tire articulating ATV with gas engine, no angle capability Price: $82,500

BUCYRUS ERIE 22W SERIES I CABLE TOOL DRILL RIG #3284T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

4 cyl Hercules engine, mounted on 2002 GMC truck with Cat 3126 diesel engine, 6 speed transmission, 1200' of drill line and 1200' of sandline Price: $42,000 - Tennessee BUCYRUS ERIE 22W CABLE TOOL DRILL RIG

1978 GARDNER DENVER 15W DRILL RIG #4863T

• Manufacturer: Gardner Denver

Beefed up to a GD 2000, manufactured 1978, 750/300 air compressor, 5 x 8 Gardner Denver 172XX high pressure piston mud pump (new hose, sprockets, chains), heavy duty mast 48’ mast x 80,000 lb pullback, 10” retrac...

1999 CME 45C AUGER DRILL RIG #3298Tc

Manufactured 1999, 3 cyl 57 hp Duetz air cooled diesel engine, 2 winches, cathead, 140 # CME auto hammer, Moyno 3L6 pump, slide base, 300 gal water tank, front winch, toolbox mounted on 1995 Markooka MST 1100, 24...

1991 MOBILE B-57 AUGER DRILL RIG #8195T

Manufactured 1991, gas deck engine, 250 gal water tank, cathead, in/out and side to side slide base, no pump, no autohammer, mounted on 1995 Ford F700 single axle truck (not 4 x 4) with gas engine Price: $39,500

1997 INGERSOLL-RAND DMLSP

• Manufacturer: Ingersoll Rand

DTH Class Single Pass Drill Rig – 55’ft – 60’ft Mast Cummins QSK19 Diesel Engine High Pressure – IR HR2.5 – 1050 CFM @ 350 PSI Onboard Air Compressor CAT 330L&S Undercarriage

Ingersoll Rand ECM-490 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: ECM-490

Good condition Ingersoll Rand ECM-490 Drilling Rigs manufactured in 2006. Located in USA and other countries. Click request price for more information.