Building Filters
Flagler Collar Machine
- Manufacturer: Flagler
This machine will form the Spin Collar pocket, coil, crimp and bead. Complete with hardened outrigger guide. 24 Ga. and lighter. 5″ – 18″ diameters. 6” Machine 2 ½”-6” wide blanks 12” Machine 6”-12″ wide blanks ...
Sutton, MA
Flagler Collar Machine
- Manufacturer: Flagler
This machine is used form forming a safety edge hem and coil the blanks commonly used for boots and fittings. 5″ min. diameter. 18″ max. diameter. 2 1/8″ Blank, 1/8″ Hem. Approx. 70 feet per minute. 1/2 HP 115/1/...
Sutton, MA
Flagler Hand Flanger Machine
- Manufacturer: Flagler
The Flagler Hand Flanger turns a 7/32″ high flange on inside or outside radii as small as 1 3/4″. Releasing top roll for the removal of a closed flange. This unit clamps to any shop bench and can be operated eith...
Sutton, MA
Flagler Sheet Gang Beader
- Manufacturer: Flagler
The Flagler Sheet Beader. This unit is designed for forming 5 beads on a 60” wide sheet at 12” increments per standards. A fully adjustable feed gauge. Micrometer adjustments on the main arbors for fast, posi...
Sutton, MA
Flagler Model “S” Cleat
- Manufacturer: Flagler
Standard with Boot Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling. Approx. 100 feet per minute. 5 HP 230/460/3/60/1800 RPM . Double Matched Vee Belt. Arc Welded S...
Sutton, MA
Flagler Model H-2510
- Manufacturer: Flagler
This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.
Sutton, MA
Flagler Model H-257
- Manufacturer: Flagler
This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.
Sutton, MA
Flagler Duct Flange Machine
- Manufacturer: Flagler
60 fpm (optional up to 100 fpm) 18-26 Gauge Galvanized 12 Stations – DF1 14 Stations – DF2 1-1/2″ dia. (at bearing) Hardened and Ground Spindles Hardened Feed Gauge Rise/Fall Short Parts Feeder 7-1/2 HP Drive Lub...
Sutton, MA
Flagler 24 Junior Pittsburgh
- Manufacturer: Flagler
Ideal for small to medium sized sheet metal contractors or jobsite manufacturing. Shown with optional Flanging Attachment and Floor Stand
Sutton, MA
Flagler Model Mini Cleat
- Manufacturer: Flagler
Standard with 1/2″ Standing “S” Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling. Approx. 100 feet per minute. 7 1/2 HP 230/460/3/60/1800 RPM . Double Vee Belt. Arc...
Sutton, MA
Flagler Model Drive Cleat
- Manufacturer: Flagler
Standard with 1 1/8” Drive Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling. Approx. 100 feet per minute. 5 HP 230/460/3/60/1800 RPM . Double Matched Vee Belt. Arc ...
Sutton, MA
Flagler High Speed Quadformer
- Manufacturer: Flagler
Standard with re info rced “S” Cleat & 1 1/8″ Drive Cleat Tooling in the center position. There are (2) sets of extended shafts for auxiliary rolls Approx. 100 feet per minute. 5 HP 230/460/3/60/1800 RPM . Double...
Sutton, MA
Lock former Flagler snap lock machine 20GA
- Manufacturer: Flagler
Model-20 Capacity-20ga Forming speed approximately 60 feet per minute 220/3/60 electrics 100% USA Built All parts available thru manufacturer We will ship worldwide@ prevailing rates
$4,750 USDSutton, MA
Flagler 18 Power Flanger Machine
- Manufacturer: Flagler
Ideal for larger fitting work. This machine is built with a heavy duty cast iron gear housing with oil bath. 1/4″ Approx. 18 feet per minute. 1/2 HP 115/1/60/1800 RPM . Vee Belt. Arc Welded Steel. heavy Top Plat...
Sutton, MA
Flagler 20 Button Punch Flanger
- Manufacturer: Flagler
For manufacturing fittings using the button lock seam rather than Pittsburgh 2 step operation, first the flange is formed then the buttons are punched. This machine is built with a heavy duty cast iron gear hous...
Sutton, MA