Flagler Hand Flanger Machine
- Manufacturer: Flagler
The Flagler Hand Flanger turns a 7/32″ high flange on inside or outside radii as small as 1 3/4″. Releasing top roll for the removal of a closed flange. This unit clamps to any shop bench and can be operated eith...
Sutton, MA
Flagler Model H-2510
- Manufacturer: Flagler
This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.
Sutton, MA
Flagler Model H-257
- Manufacturer: Flagler
This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.
Sutton, MA
Flagler Duct Flange Machine
- Manufacturer: Flagler
60 fpm (optional up to 100 fpm) 18-26 Gauge Galvanized 12 Stations – DF1 14 Stations – DF2 1-1/2″ dia. (at bearing) Hardened and Ground Spindles Hardened Feed Gauge Rise/Fall Short Parts Feeder 7-1/2 HP Drive Lub...
Sutton, MA
Flagler Model Mini Cleat
- Manufacturer: Flagler
Standard with 1/2″ Standing “S” Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling. Approx. 100 feet per minute. 7 1/2 HP 230/460/3/60/1800 RPM . Double Vee Belt. Arc...
Sutton, MA
Flagler High Speed Quadformer
- Manufacturer: Flagler
Standard with re info rced “S” Cleat & 1 1/8″ Drive Cleat Tooling in the center position. There are (2) sets of extended shafts for auxiliary rolls Approx. 100 feet per minute. 5 HP 230/460/3/60/1800 RPM . Double...
Sutton, MA
Flagler 20 Button Punch Flanger
- Manufacturer: Flagler
For manufacturing fittings using the button lock seam rather than Pittsburgh 2 step operation, first the flange is formed then the buttons are punched. This machine is built with a heavy duty cast iron gear hous...
Sutton, MA
Flagler 18 Power Flanger Machine
- Manufacturer: Flagler
Ideal for larger fitting work. This machine is built with a heavy duty cast iron gear housing with oil bath. 1/4″ Approx. 18 feet per minute. 1/2 HP 115/1/60/1800 RPM . Vee Belt. Arc Welded Steel. heavy Top Plat...
Sutton, MA
Flagler 16 Power Flanger Machine
- Manufacturer: Flagler
Ideal for larger fitting work. This machine is built with a heavy duty cast iron gear housing with oil bath.
Sutton, MA
Flagler 20 Power Flanger Machine
- Manufacturer: Flagler
Stand alone flanger to allow shops to free up their flanging attachment on their Pittsburgh machine, complete with flange follower. 20 Ga. and Lighter 7/32” Approx. 25 feet per minute. 1/2 HP 115/1/60/1800 RPM . ...
Sutton, MA
Flagler 12 Station Lockformer TDC Machine
- Manufacturer: Flagler
Extended Shafts for Auxiliary Tooling Features: 12 Forming stations with Adjustable Feed table for dual TDC Forming when forming TDC Flange on opposing side of duct work 1-1/2″ Dia.(At Bearing) Hardened and Groun...
Flagler Model H-2 1/2-10
- Manufacturer: Flagler
This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.
Sutton, MA
Pneumatic Cleatfolder Machines
- Manufacturer: Flagler
The Flagler Open Throat Pneumatic Cleatfolders come complete with 6 gallon surge tank so they can be operated from a standard 3/8” compressed air line. Each model comes equipped with micro PLC controller, guard ...
Sutton, MA
Drive Turn Hemmer
- Manufacturer: Flagler
Rollform your drive turn hems on this machine after notching and prior to bending into L or full wrap sections. Simple select the sections to be hemmed with the selector switch and run through. The machine will...
Sutton, MA
Tip: Enter manufacturer, model or keyword