Used Saws in Rhineland-Palatinate, Germany

MG3 Automatic circular saws

The MG 3 chip extractor collects dust and chips in a movable 172-litre container. It has two suction outlets (with nozzles) with a diameter of 100 mm and can be operated either in continuous operation or controll...

MG6 Automatic circular saws

The swarf extractor MG6 collects dust and Aluminum chips in a removable drivable 160-liter container. It has a 160 mm diameter inlet hole (without adaptor) and can be run either continuously or controlled through...

EISELE VMS-II-S PV Type-Nr. 421

• Manufacturer: Eisele
• Model: VMS-II

Description EISELE – Semi-automatic VMS-II-S PV Type No. 421 Features: – semi-automatic vertical cold circular saw – pneumatic material quick-clamping device – Infinitely variable saw blade feed – Roller conveyor...

Profilma 502ST

For cutting to length and punching aluminum profiles. Fully automatic operation with graphic controls. Drive 7,5 kW, S6, 400 V, 50 Hz, 2850 rpm. For use of saw blades Ø 500 or 550 mm. Siemens S7 control with touc...

Profilma 250

The high-performance automatic saw Profilma 250 is designed for cutting aluminum and non-ferrous metals to length with a particularly thin saw blade. Depending on the version, solid carbide circular saw blades Ø...

Profilma 502

Fully automatic operation with graphic control elements. 7.5 kW drive, 400V, 50 Hz. For HM or PCD saw blades Ø550 mm, max. 2850 rpm. Servo-controlled saw feed, vertically from below. Material feed via servo-contr...

TS 350

For sawing aluminum and plastic profiles. Use of Ø350 mm saw blades. Drive 1.5 KW, 400 V, 50 Hz. Manual handling, saw cut from bottom to top. Material cross lay swivel 45 ° -90 ° -45 ° with scale. Pneumatic profi...

Profilma 620

High performance automatic circular saw for aluminum and non-ferrous metals Fully automatic operation Infinitely adjustable speed control of the saw blade engine Material and saw feeder movement through servo dri...

Prisma 650E / 652

Variable notching possibilities for mullion and transom combinations, e.g. curtain walls, winter garden, sky lights and special designs. Notch variation: rectangle, one sided angular, two sided angular, 3 sided a...

Profilma 400V

Fully automatic operation cutting of aluminium and non-ferrous metal NC Control with touch screen display 5,7” Piece counter showing target/actual number of pieces Piece multiplier when cutting bundles Indication...

Procut 550

Precise 45° V-cuts and minimal waste when use as double mitre saw 90° end notching saw for aluminium and PVC profiles 2 saw blades, Ø 550 mm Profile height max. 220 mm, cutting depth 45° = 125 mm, end notch 90° ...

Prisma 500

Variable notching possibilities for mullion and transom combinations, e.g. curtain walls, winter garden, sky lights and special designs Manual adjustment of the horizontal blade max. 20mm to the front to cut slot...

GS 600

For aluminum and plastic profiles. Drive power 5.5 kW, 400 V, 50 Hz 3,000 rpm. Hydropneumatic saw feed from below. Manual miter adjustment between 20 ° – 90 ° – 20 ° with electronic digital display. Halftone dots...

GS 350

For sawing aluminum and plastic profiles. Use of Ø 350 mm saw blades. Drive 2.2 KW, 400 V, 50 Hz. Saw cut from bottom to top, pneumatic with 2 hand operation. Manual miter setting 30 ° – 90 ° – 0 °. Grid points a...

Cutting Line KS600R

Cutting line with loading magazine and profile disposal for small parts and take-off stations for cut-off lengths up to 7,200 mm or 2 times up to 3,000 mm. Technical data: Sawing line for cut-off lengths from 10 ...