Used Machine Tools in Saitama, Japan

Muracosi UM - 2200 F
- Manufacturer: Muracosi
The blower is built in the filter chamber. Noise value is lower than MY type It is lower price than HM type. For models that have electric motors of 2.2 kW or more A convenient hopper type for dust removal can al...
Kumagaya, Japan
2018 Yamazaki Mazak INTEGREX J-200S
- Manufacturer: Mazak
- Model: INTEGREX J-200S
Specifications To inquire about this machine, please fill in the following information and click the [Send] button. Items marked with an asterisk (*) are required fields, so please be sure not to omit any informa...
Kawaguchi, Japan
2016 Uryu Production NR-605309
- Manufacturer: Uryu
Product name: Other | Main specifications: H1900419 Valve Cover Tightening Machine Rated voltage: AC 200V, 60Hz Rated capacity: 3.0 KVA , 15A
$669 USD
Tokigawa, Japan
Asahi Seiki Scroller 1500
- Manufacturer: Asahi Seiki
To inquire about this machine, please fill in the following information and click the [Send] button. Items marked with an asterisk (*) are required fields, so please be sure not to omit any information. Footprint...
Kawaguchi, Japan
Dainippon Sumitomo DGM-400S
- Manufacturer: Dainippon Screen
Designed so that the thickest material of up to 250 mm and the thinner of the assembly always get the same consistent condition! Simultaneous processing is possible even with materials of different thicknesses!
Kumagaya, Japan
Murakoshi MY-100XN
- Manufacturer: Murakoshi
It is a drawer specification combined with a filter for fine powder with 3 horsepower.
Kumagaya, Japan
Murakoshi MY-75X
- Manufacturer: Murakoshi
Equipped with a highly energy-efficient inverter. Air volume can be adjusted. Plastic bags are secured with a one-touch ring. Easily removable by pulling the ribbon. φ100 duct hose Hose band Round hood Various op...
$1,331 USD
Kumagaya, Japan
Muracosi MYG-75
- Manufacturer: Muracosi
Built-in inverter with high energy saving effect. Air volume adjustment is possible. There may be changes to the inverter. Dust outlet. Since dust collects at the entrance It can be easily taken out with the atta...
Kumagaya, Japan
Laxo LE400
- Manufacturer: Laxo
Product name: Contour machine | Main specifications: Cutting capacity: Height 300 Depth 395 Cutting stroke: 330 Table dimensions: 600x600
Tokigawa, Japan
2015 Accors Flywheel Spin Tester
- Manufacturer: ACORDS
Flywheel spin tester φ450 Product name: testing machine | Main specifications: Flywheel spin tester φ450
Tokigawa, Japan
Kanefusa Finishing bits, double-pressed type
- Manufacturer: Kanefusa
Bits for finishing in light cutting. The double-pressed type is effective in suppressing burrs on the top and bottom surfaces. Shaft diameter: φ12/φ16 Blade diameter: φ12/φ16 Overall length: 105/110mm Blade lengt...
Kumagaya, Japan
Kanefusa, alternate blade type, super-finishing plane blade (for stationary type)
- Manufacturer: Kanefusa
No re-sharpening is required due to the replaceable blade type. The replacement blade has a The back blade is equipped with a back blade function. The back blade can be cut without adjustment. The holder has a bu...
Kumagaya, Japan
Kanefusa with hole for molders
- Manufacturer: Kanefusa
Kanefusa has developed a knife holder mechanism that automatically sets the blade by centrifugal force. The knife holder mechanism developed by Kanefusa allows the blade to be set automatically by centrifugal for...
Kumagaya, Japan
Kanefusa super-finishing plane blade
- Manufacturer: Kanefusa
It has excellent performance in both soft and hard materials. It also Smooth and beautiful cutting surfaces can be obtained. and good sharpness of cut and light work is possible due to low resistance. Various siz...
Kumagaya, Japan
Kanefusa Jointer Knife
- Manufacturer: Kanefusa
No re-sharpening is required due to the replaceable blade type. The replacement blade has a The back blade is equipped with a back blade function. The back blade can be cut without adjustment. The holder has a bu...
Kumagaya, Japan