Used Machine Tools in Saitama, Japan

HiKOKI WR36DD(2XPS)

• Manufacturer: Hikoki

Easy to handle (compact body with overall length of 169 mm) Auto stop function to prevent over-tightening of bolts RPM (power) and auto-stop time of the auto-stop function can be adjusted with a dedicated smartph...

Max WH-2

• Manufacturer: Max.

Rose nails for siding. Plastic sheet can be easily connected.

Makita AN936H to AN936HM

• Manufacturer: Makita

Powerful Low recoil Low noise. Air pressure: 1.28 to 2.26 sMpa | Nails used: Wire nails 45-90mm Sheet nails (wide) 45-75mm | Number of nails loaded: Wire nails: 120-300 (1 roll)Sheet nails: 200 (1 roll) | Mass: 2...

SPL-37

This is a used Anest Iwata oil-free scroll compressor, the SLP-37. It has a long operating time of 12,719 hours, but because it's a scroll compressor, it's extremely quiet and quickly fills with air. Please feel ...

Matsui Ironworks MC-100

• Manufacturer: Matsui

-The industry's first 100V specification, low cost and compact size. Standard specifications (hole diameter 20 mm) -φ100 (4" and 5" materials) -φ120 (6" material) -φ140 (8" material) -φ160 (1" material)

Matsui Ironworks SZ-082

• Manufacturer: Matsui

Finish processing can be performed when conventional canners cannot.

Matsui Ironworks KA-240

• Manufacturer: Matsui

-Easy to set up by using our original mechanism. Easy to set up -The main body of the product can be easily moved The main body of the product can be set without moving the material.

Matsui Ironworks TK-150

• Manufacturer: Matsui

-By applying the mold to the guide, it is easy to process the same shape as the mold. The same shape as the mold can be easily processed by placing the mold on the guide.

Matsui Ironworks MC-100

• Manufacturer: Matsui

-The industry's first 100V specification, low cost and compact size. Standard specifications (hole diameter 20 mm) -φ100 (4" and 5" materials) -φ120 (6" material) -φ140 (8" material) -φ160 (1" material)

2020 Enshu EV450Te

• Manufacturer: Enshu

Specifications] FANUC-0iF FANUC-0iF With additional 1-axis function BT40/40 to 10,000rpm Number of ATCs: 20 Travel (X, Y, Z): 560㎜×450㎜×460㎜ Table size: 800㎜×450㎜ Note) Without chip conveyor Machine weight: T4500...

Marunaka MA-101

• Manufacturer: Marunaka

This item is Used item. It comes with a hexagonal wrench and a spanner. The condition of the item is as shown in the pictures. If you can come to pick it up You are very welcome. You can check the actual item. Op...

Muracosi UM - 2200 F

• Manufacturer: Muracosi

The blower is built in the filter chamber. Noise value is lower than MY type It is lower price than HM type. For models that have electric motors of 2.2 kW or more A convenient hopper type for dust removal can al...

Dainippon Sumitomo DGM-400S

• Manufacturer: Dainippon Screen

Designed so that the thickest material of up to 250 mm and the thinner of the assembly always get the same consistent condition! Simultaneous processing is possible even with materials of different thicknesses!

Murakoshi MY-100XN

• Manufacturer: Murakoshi

It is a drawer specification combined with a filter for fine powder with 3 horsepower.

Murakoshi MY-75X

• Manufacturer: Murakoshi

Equipped with a highly energy-efficient inverter. Air volume can be adjusted. Plastic bags are secured with a one-touch ring. Easily removable by pulling the ribbon. φ100 duct hose Hose band Round hood Various op...