Used Heat Exchangers in Utrecht, Netherlands

Tubelar heat exchanger

Monotube. Straight design. 2 Tubes, 1 section. Length: 1,5 mtr. 1'' , 1,5'' and 2'' tube in each other (triple tube). The inner tube 1,5'' is for product. Connection: product: 1'' DIN, service: 1'' DIN. Placed on...

Plate heat exchanger

Plate heat exchanger, not sanitary. 1 section with 19 plates. 4 in-/outlets of 22 mm. Total dimensions 40 x 25 x 50 cm.

Het Stempel BV Tube heat exchanger

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE) and static mixer to have optiomal heat exchanging. Monotube, 1 compartment, Straight design with swirls, 4 tubes, 1 section, Length: 2 mtr, outer diameter 38 mm, inner diam...

Insulated Tube Heat Exchanger

Insulated tube heat exchanger, Monotube, 13tubes of 6mtr long, surface ±: 4.9m2 total surface, dimensions total unit 6,200 mm x 400 mm x 1,300 mm, 6bar, 150°C max,

TSA Tubular heat exchanger

Tubular heatex changer. 52 tubes -Length tubes: 130 cm -Diameter tubes Ø 20 mm. '' Conn "Steam DN50- Product 2x DN65.

Ritter Tubular heat exchanger

• Manufacturer: Ritter

Total Dimensions: L 323cm x H 40cm x L 323cm, Product chamber: operating pressure +6 bar, 60Liter, + 180 ° C, Jacket Chamber, 33L, + 90 ° C, operating pressure +6 Bar.

1989 Wilhelm Deller heat exchanger

• Manufacturer: Wilhelm Deller KG

Hotwater prepartion unit, volume 1175 ltr, 80 ° C, pressure 5 bar. Jacket volume 13.5 ltr, 175 ° C, pressure 8 bar.

1993 Alfa Laval plate heat exchanger

• Manufacturer: Alfa-Laval

Alfa Laval plate heat exchanger. 1 section - 50 plates - max 30 bar - Capacity 6.00/ 6.25.

Armfield FT 43-A-A

• Manufacturer: Armfield

Armfield Laboratory Pasteurizer FT 43A. With controls. Set consists out of feed tank, pump, plate heat exchanger, hot water tank, pump, holding and diverter valve. Total dimensions: 76x55x65 (lxwxh) cm - weight ...

APV 3HD672

• Manufacturer: APV

Scrape surface heat exchanger. 2 product cylinders. Tube Ø 150 mm. Surface per tube 0,84 m². 1x Main motor which drive both dashers. Previous used on heating media: steam. Pressure product side: 12 bar. Pressure ...

1991 GEA Ahlborn VT 4

• Manufacturer: GEA

Plate heat exchanger, sanitary (PHE). Max working pressure: 6 bar. Beam length: 165 cm, connections: 4x2" Din. Current configuration: 1 Section: 50 plates. Connections follower: 2 up/2 down. Dimensions: 38x17,5x5...

2009 Alfa Laval Front 8-RH

• Manufacturer: Alfa-Laval

Plate heat exchanger, sanitary (PHE). Pressure: 16,0 bar, Beam length: 120 cm, connections: 4x3" DIN. Current configuration: 1 sections: 81 plates. Design temperature 0/120 °C. - Connections head: 2 down, followe...

1977 Crepaco/APV 1HRT-672

• Manufacturer: Crepaco

Sraped Surface heat exchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10...

2013 Alfa Laval Front 8 RM

• Manufacturer: Alfa-Laval

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar - beam length: 180 cm, connections: 8 x 3" Din. Currenct configuration: 3 Sections: 37-48-36 plates (total 121 plates) - Connections head: 2 up and 2 down,...

Crepaco 1VT422

• Manufacturer: Crepaco

Scraped surface heat exchanger (SSHE). 1 Vertical Product cylinder, tube: Ø 96 mm, length 1,500 mm, rotor Ø 38 mm with 2 scrapers. Cylinder material: stainless steel. Surface per tube 0,19 m² and volume per tube ...