Used Heat Exchangers in Utrecht, Netherlands

2001 Tetra Pak/Alfa Laval C6-SR

• Manufacturer: Alfa-Laval
• Model: C6-SR

Plate heat exchanger, sanitary (PHE). Dessign pressure: 10,0 bar. Beam length: 240 cm, connections: 16x 2" SMS. Current configuration: 4 Sections: 108-50-10-10 plates, total 178 plates. Connections head: 2 up, fo...

1994 Alfa Laval Clip 10

• Manufacturer: Alfa-Laval
• Model: CLIP 10

Cheese milk pasteurizer. Exisiting out of: balance tank executed in stainless steel with level senors control with spraybowl for cip, level sensor. 3 Centrifugal pumps. Plateheatexchanger, 4 section, regeneratio...

Het Stempel BV N.N.

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE). Monotube, 1 compartments, Straight design, 3 tubes, 1 section. Length inner tube: 200 cm, length outer tube 180 cm. Outer diameter 38 mm, inner diameter: 22,5 mm. Connecti...

1996 Tetra Pak TTF-2 84c / 38c-6-1 & BSTF-2 54c / 4x16S-6-1

• Manufacturer: Tetra Pak
• Model: TTF2

Tubular heat exchanging unit. Existing out of: 14 tubes (7 sets of 2), multitube, straight design, 1 section, length: 6 mtr, outer diameter 54 mm coagurated (spiral wound), 4 inner tubes of diameter 16 mm, smooth...

1995 Alfa Laval M6

• Manufacturer: Alfa-Laval
• Model: M6

Skid mounted milk pasteurizer: Capacity: 7,000 l/h. Thermal cycle: in 4 → 55 (separator) →72 holding → 30°C. Balance tank, filter, pumps, heat exchanger Alfa-Laval M6, year: 1995, valves, control valve steam. Ins...

2007 APV N35

• Manufacturer: APV
• Model: N35

Milk pasteurization unit. complete skid mounted unit with all piping, valves on 1 stainless steel frame. Temperature scheme of milk: in 4 °C -＞ outlet to homogeniser and/or separator (homogeniser/separator exclu...

1988 Stork Sterideal

• Manufacturer: Stork
• Model: STERIDEAL

Stork Sterideal. UHT line, consists of Stork UHT, Tubular indirect heating, 4 sections of triple tube (tube in tube in tube), Stork holding tube and Skid with infeed tank. new Tubular heatexchanger in 2012 only u...

1994 Wilhelm Deller KG 27197/1

• Manufacturer: Wilhelm Deller KG

Water = 6barr / 208C / 19 L - Steam = 6barr / 208C / 36L - 46.5kW

N.N.. SS Heater

• Manufacturer: N.N..

Water heater, Insulated rectangular tank with spiral. Used as heater of water by circulation under pressure hotwater through a spiral and circulation of (sanitary) water without pressure for usage for in the fact...

1998 Baelz 106-42-45-FN-B1

• Manufacturer: Baelz

Tubular Heatexchanger Steam/Water. Multitube. Spiral design. 1 Tube. 1 Section. Length: 0,95 mtr. Outer diameter 280 mm. 42x tubes of 8 mm inner diameter. Steam section: 18 bar, 250 °C, 14 ltr. Water section: 10 ...

N.N. SS insulated lab holding

• Manufacturer: N.N..

Laboratory insulated mobile holding with 3 loops. A.) 1.66 l - 1 min. 100 l/h. B.) 3.32 ltr - 2 min - 100 l/h. C.) 3.23 ltr - 2 min - 100 l/h. Connections: 2 x 1" Din - 2 x 15 mm Din. Total dimensions: 80x43x105 ...

N.N.. SS

• Manufacturer: N.N..

Double jacketed pin mixer. Shaft diameter 85 mm, 3 rows with 14 pins (42 pieces total) - cylinder diameter 250 mm with 2 rows with 19 and 20 (total 39) pieces. Cylinder length 195 cm. Connections: 2 x 2" Din and ...

Tubular Heatexchanger

Monotube, inner diameter (product) 23mm outer diameter (water) 40mm, 42 tubes x 3 mtr each. total dimensions: Length 3.00 mtr x Width 1.30 m, Height 1.50 mtr. On a stainless steel frame. Flexible in using, many l...

1972 Paasch & Silkeborg H-3575

• Manufacturer: Paasch & Silkeborg

Tubular Heatexchanger 36 tubes, total dimensions: L 320cm X W 80cm X H 140cm

2006 Alfa Laval C10-SR

• Manufacturer: Alfa-Laval

Design pressure: 10.0 bar, design temperature: -10 / 110 ° C, test pressure (Gauge): 13.0 bar