Used Extruders

6″ Davis Standard 60IN60TPIH 30:1 500 HP VENTED EXTRUDER

• Manufacturer: Davis-Standard

DAVIS STANDARD 3.5″ SINGLE STAGE 12028

• Manufacturer: Davis-Standard

Davis Standard 3.5″ chrome plated single stage extruder screw. Approximately 24:1 L/D. Four rows of mixing pins.

TWO STAGE 4.5″ CHROME PLATED 12019

4.5″ chrome plated two stage extruder screw with mixing pins at the end of first stage. Approximately 28:1 L/D single key shaft. Unknown manufacturer.

UNK MFG 5″ SINGLE SCREW 12404

Unk Mfg. 5″ single screw extruder barrel, non-vented, 24:1 L/D, 8 bolt flange mount to gearbox. Threaded front of barrel to accept screen changer. Overall length is 134.5″ with 4.25″ end extension.

DAVIS STANDARD 4.5″ SINGLE STAGE 12018

• Manufacturer: Davis-Standard

Davis Standard 4.5″ single stage extruder screw. Approximately 28:1 L/D with four rows of mixing pins.

DAVIS STANDARD 4.5″ SINGLE STAGE 12022

• Manufacturer: Davis-Standard

Davis Standard 4.5″ single stage extruder screw. Approximately 30:1 L/D with three rows of mixing pins near the screw end.

DAVIS STANDARD 2.5″ BARREL WITH 2023

• Manufacturer: Davis-Standard

Davis Standard 2.5″ extruder barrel. 24:1 L/D with Xalloy 800 liner. Barrel measures approximately 10-14 millimeters of wear.

COPERIAN ZSK-40 40MM TWIN SCREW 18943

Used 40mm Coperion Type ZSK-40-Mega co-rotating twin screw extruder. S/N 07-3059. New in 2008. No barrels or screws included. Driven by 200 HP 1790 RPM A/C motor with Powerflight VFD controller. Has 1.155 gear ra...

Fuji Paudal Pilot Press Stainless Steel Extruder Model EXDS-60

• Manufacturer: Fuji Paudal
• Model: EXDS-60

Fuji Paudal Pilot Press Stainless Steel Pharma Style Extruder, Model EXDS-60, This unit is rated at 20-50 kg/hrs. Includes twin extrusion screws

NEW / UN WELEX 4.5 12346

• Manufacturer: Welex

New chrome plated Welex 4.5″ extruder screw, S/N 18079. 36:1 L/D, 8″ long x 1″ wide, keyway 190.5″ overall length.

WERNER & PFLEIDERER ZSK40 TWIN 17698

• Manufacturer: WP

Werner & Pfleiderer Model ZSK40 40mm co-rotating twin screw extruder, S/N 180399, 1990 model year, 46:1 L//D vented barrel with 11 barrel sections and a 41″ centerline. Driven by a 50 HP 500-volt 1750/2100 RPM D/...

WERNER & PFLEIDERER ZSK20 TWIN 17702

• Manufacturer: WP

Werner & Pfleiderer Model ZSK20 20mm co-rotating twin screw extruder. S/N 02-3108-1000-010-1, Has 40:1 L/D barrel at a 43″ center line driven through a 3:1 gearbox with a 37 newton meter torque capacity per screw...

DAVIS STANDARD 3.5″ SINGLE STAGE 12024

• Manufacturer: Davis-Standard

Davis Standard 3.5″ single stage extruder screw. Approximately 24:1 L/D with five mixing pin sections.

STEER ENGINEERING 12mm TWIN SCREW 16620

Steer Engineering Pharmaceutical twin-screw extruder, S/N EA00427. Model Omicron 12P new in 2014. Screw diameter is 12mm diameter ratio (do/di) is 1.45 flight depth is 1.9 max screw speed is 900 RPM 2HP drive, 48...