Used Extruders

DAVIS STANDARD 130mm 32:1 L/D 18933

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130 mm (5.1″) model 130IN45HT extruder. S/N 14844. Shop order 70693. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ c...

DAVIS STANDARD 3.5″ 30:1 L/D 16399

• Manufacturer: Davis-Standard

Used Davis Standard model MV35IN35SR, 3.5″ extruder, S/N K2187, SO# 99878. 30:1 L/D barrel having a seven zone electrically heated and water cooled (closed loop) and side vented barrel at a 52″ centerline height....

GLOUCESTER 2522 2.5″ 32:1 L/D 17805

One (1) Used Gloucester model 2522 R2 2.5″ 32:1 L/D extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72″ center line height. Gearbox has a reduction ra...

EGAN 3.5″ 32:1 L/D 150 17807

• Manufacturer: Egan

One (1) used 3.5″ 32:1 L/D Egan extruder having an electrically heated, water cooled (closed loop), top vented, and plugged barrel at an approximate 52″ center line height. Philadelphia gearbox has a reduction ra...

HARTIG 2.5″ 24:1 L/D 50 18342

One (1) Used 2.5″ Hartig extruder. S/N BE-819. 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 42″ center line height. 3″ round feed entrance. Koellmann gearbox ha...

WELEX 6″ 36:1 L/D 500 18830

• Manufacturer: Welex

One (1) used Welex model 6.0 36D 6″ 36:1 L/D extruder. S/N 6492. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate 66″ center line height. Koellman model Unex 8.13 gea...

GLOUCESTER 4.5″ 30:1 250 HP 18227

One (1) used Gloucester model 244-001 4.5″ 30:1 L/D extruder having an electrically heated, air cooled, and non-vented barrel at an approximate 56″ center line height. Cool Touch heaters with integral blowers wer...

NRM PACEMAKER III 3.5″ 32:1 18061

One (1) used NRM PM III 3.5″ 32:1 L/D extruder having a five (5) zone electrically heated, air cooled, and non-vented barrel at an approximate 42″ center line height. Gearbox has a reduction ratio of 17.42:1 and ...

DAVIS STANDARD 130mm 32:1 L/D 18935

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130mm (5.1″) model 130IN45HT extruder. S/N U7644. Shop order 58491. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ ce...

KILLION KN-150 1.5″ 30:1 L/D 18111

One used Killion model KN-150 1.5″ 30:1 extruder. S/N 15437. Five (5) zone electrically heated, air cooled, and top-vented barrel at an approximate 39″ centerline height. Gearbox is a Koellmann model PEZS20 and h...

DAVIS STANDARD 10″ 38:1 L/D 18953

• Manufacturer: Davis-Standard

Used Davis Standard Model 100TH100D 10″ 38:1 L/D extruder. Having a eight (8) zone electrically, heated, water cooled and non-vented barrel at a nominal 44″ center-line. S/N L3201. Shop Order 03643. Gearbox has a...

JOHNSON 1.5 8891

• Manufacturer: Johnson

Johnson 1-1/2″ extruder, 24:1 L/D. Non-vented barrel mounted on a base for co-extrusion. 10HP DC motor with no controls. S/N 7619-15. 11.32:1 gear box, 41 HP with a 1.25 service factor. No barrel cooling.

JOHNSON 1.5″ 8786

• Manufacturer: Johnson

Johnson 1-1/2″ extruder 24:1 L/D, non-vented barrel mounted on base for co-extrusion. 10HP DC motor with no controls. 11.32:1 gear box rating at 41HP with a 1.25 service factor. No barrel cooling. S/N 7621-15

KILLION 1.250″ 30: 7.5 HP 16432

One used Killion model KN-125 1.25” 30:1 extruder having a four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 39″ centerline height. Gearbox is a Koellmann model PEZS-20 and h...

EGAN 6″ 30:1 L/D 400 18037

• Manufacturer: Egan

One (1) used Egan 6″ 30:1 L/D extruder. S/N 37910. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate a 42” center line height. Water system is incomplete. Philadelphi...