Used Extruders

DAVIS STANDARD 1.25″ PEDESTAL EXTRUDER 19062
- Manufacturer: Davis-Standard
One (1) used 1.25” 24:1 L/D Davis Standard model DS125 1.25” pedestal extruder having a three (3) zone electrically heated and air-cooled barrel. S/N S1962. Shop Order Number 55728. Unit is mounted on a tripod wi...
Elk Grove Village, IL
Trusted Seller
Used Processing Technologies International LLC Model G6500 Trident Series Single Screw extruder
- Manufacturer: International
Used Processing Technologies International LLC Model G6500 L/D ratio 32:1Trident Series Single Screw extruder. S/N 16709-4480. Gear Drive Info: PTI Model ZPE2-360-B B7 S/N 15258, Ratio: 12.50:1, Driver: 1800, Dri...
Salisbury, NC
Trusted Seller
Used Processing Technologies International LLC Model G3500 Trident Series Single Screw extruder
- Manufacturer: International
Used Processing Technologies International LLC Model G3500 L/D ratio 32:1 Trident Series Single Screw extruder. S/N 16709-4478. Gear Drive Info: PTI Model ZPE2-225- B B7, S/N L43058, Ratio 12.59:1, Driver:1800, D...
Salisbury, NC
Trusted Seller
Used Processing Technologies International LLC Model G3500Trident Series Single Screw extruder
- Manufacturer: International
Used Processing Technologies International LLC Model G3500 L/D ratio 32:1 Trident Series Single Screw extruder. S/N 16709-4482. Gear Drive Info: PTI Model ZPE2-225- B B7, S/N L43057, Ratio 12.59:1, Driver:1800, D...
Salisbury, NC
DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19061
- Manufacturer: Davis-Standard
One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having four (4) zone electrically heated and air-cooled barrel. S/N S1966. Shop Order Number 55728. Unit is mounted on a tripod with cas...
Elk Grove Village, IL
KILLION 1″ 24:1 L/D EXTRUDER 16305
24:1 Killion pedestal extruder. S/N N6598 with a three (3) zone electrically heated air cooled barrel. Gearbox has a reduction ratio of 30:1 and is direct driven by a 3HP 1750/2050 RPM DC motor. Barrel can be rai...
Elk Grove Village, IL
WELEX 2″ 24:1 L/D EXTRUDER 17438
- Manufacturer: Welex
Welex model 200-24/1, 2″ 24:1 L/D extruder with a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 50″ centerline height. Gearbox is a Koellmann Gear and is belt driven by a 20 ...
Elk Grove Village, IL
Trusted Seller
Used Processing Technologies International LLC Model G5000 Trident Series Single Screw extruder
- Manufacturer: International
Used Processing Technologies International LLC Model G5000 L/D ratio 32:1 Trident Series Single Screw extruder. S/N 16709-4484. Gear Drive Info: PTI Model ZPE2-300- B B7, S/N 15253, Ratio 12.66:1, Driver:1800, Dr...
Salisbury, NC
DAVIS STANDARD 3.5″ EXTRUDER W/DUAL 17744
- Manufacturer: Davis-Standard
Davis Standard straw/tubing co-extrusion extrusion package manufactured 10/2012Last used on three color straws extruding two lanes of straws at one time. Extruders and controls are unitized on a single base. 460/...
Elk Grove Village, IL
Trusted Seller
TROMP 3 ROLL 1000 EXTRUDER
- Manufacturer: TROMP
TROMP EXTRUDER MODEL: 1000 ORDER #: 9534 3 ROLL EXTRUDER 1 METER WIDE Can be used over a Tunnel Oven Band or has a Tray Loading Conveyor if using a Rotary Oven & Trays Last Doing Cheese Straws 3 Dies Inclu...
Columbia, TN
DAVIS STANDARD 165mm (6.5″) EXTRUDER 19033
- Manufacturer: Davis-Standard
One used (1) Davis Standard model 165MM60T 165mm (6.49″) extruder having a 34:1 L/D ratio with a nine (9) zone electrically heated, water cooled (closed loop), vented and plugged barrel at presently an 89″ center...
Elk Grove Village, IL
Trusted Seller
Extruder 83 mm (3.3 in) - IPP# 210323
- Manufacturer: Werner & Pfleiderer
twin screw extruder Two 3,27 mm screws Electric heated barrel with water cooled jacket 68” long, 3” diameter discharge Unit is base mounted cooling water circulating skid
Princeton Junction, NJ
Trusted Seller
Auction
Davis-Standard Tandem Film Extrusion Coating Line
- Manufacturer: Davis-Standard
Davis-Standard Tandem Film Extrusion Coating Line Specsheet: Film Thickness: 1 mil - 15 mil Web Width: 30" - 80" Unwind Core Sizes: 3" / 6" / 10" Max. Unwind Roll Diameter: 45" Rewind Core Size: 6" Max. Rewi...
Franklin Park, IL
Visit Auction Website
2.5″ 30:1 L/D EXTRUDER 17759
Unknown manufacture 2.5″ extruder, 30:1 L/D air cooled non-vented barrel at a 23.5″ centerline. Powered by a 40 HP 230/460-volt A/C motor with Teco A510 inverter. 4″ x 6″ feed throat. Unitized control panel with ...
Elk Grove Village, IL
3.5″, EXTRUDER SCREW, 30:1 L/D 14756
3.5″ 30:1 extruder screw barrier mid-section, Previously ran PEP material.
Elk Grove Village, IL