Used Extruders

3.5″ Davis Std. 75 HP Air Cooled Extruder

• Manufacturer: Davis-Standard

1997 Davis Standard 3.5 Inch Single Screw Extruder:

Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder

• Manufacturer: Leistritz

10151570 Used Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder, Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Newton meters per shaft torque c...

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned 42″ Centerline – 36:1 L/D Ratio – 6″ x 3.5″ feed throat, Belt Driven through a 13.95:1 Koellman PEZS 360/3.5 Gearbox, Rated to 125 HP, 75 HP Baldor DC Motor with R...

Imperia & Monferrina P6 Automatic Fresh Pasta Extruder – 12 kg/hour Production

• Manufacturer: Imperia & Monferrina

53859001 Used Imperia & Monferrina Automatic Fresh Pasta Extruder, Model P6. 12 kg/hour pasta production; 6 kg capacity kneading vat; 89 mm die diameter; Automatic cutter with speed controls. Includes Multipasta ...

3.5″ Davis Std. 30:1 Air Cooled Extruder

• Manufacturer: Davis-Standard

3 1/2” Davis Standard 30:1 150 H.P. A.C. Air Cooled 350 to 400 # per HR. Material Poly No Clamp Bolt on Front End 17:1 Gear Ratio 100 RPM 5 Barrel Zones 4 Die Zones

Gloucester 2522 R2 2.5" Extruder – 60 HP, 32:1 L/D, Reconditioned

• Manufacturer: GloucesterGloucester

10755143 Used Gloucester Model 2522 R2 2.5" 32:1 L/D Extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. Gearbox has a reduction ra...

Pre-Owned Killion KL-075 Single Screw Extruder – Electrically Heated, Air-Cooled

• Manufacturer: KillionKillion

54037006 Used Killion KL-075 Single Screw Extruder. 19.1 mm Diameter screws. 25:1 L/D. Screw speed 12-120 RPM via a gearbox by a 1.1 kW-380 volt/50cycle/3Ph DC motor. 3 housing sections. Electrically heated, air ...

20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder

• Manufacturer: WP
• Model: ZSK20

10151389 Used 20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft...

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER

• Manufacturer: NRM

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER REBUILT – approximately 43″ centerline height, gearbox having new bearings and seals with cooling system – new heat exhanger and pump, 30:1 L/D 8 zone barrel, cast...

Werner & Pfleiderer ZSK40 Twin Screw Extruder for Sale – 40mm, 50 HP

• Manufacturer: WP
• Model: ZSK40

10151368 Used Werner & Pfleiderer Model ZSK40, 40mm Co-rotating twin screw extruder. 1990 Model year. 46:1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100...

Coperian ZSK-18 ML Twin Scrw Extruders New 2008 (3 available)

Coperian ZSK-18 ML Twin Scrw Extruders New 2008 (3 available) Screw Diameter: 18 mm/twin screw 15 HP Centerline – 1100mm/43.3″ Water Cooled 460 volt

3.5″ Davis Std. 24:1 Extruder Model 35IN35

• Manufacturer: Davis-Standard

3.5″ Davis Std. 24:1 Extruder – Model 35IN35 – New in 1995 – but Refurbished since and not been used since … 50 HP AC motor and Drive Air Cooled 5 Barrel Zones – 3 Die Zones

Rebuilt Davis-Standard 6” Extruder Model 60IN60TPIH – 500 HP, 30:1 L/D

• Manufacturer: Davis-Standard
• Model: 60IN60TPIH

51068004 Used Rebuilt Davis-Standard 6" Extruder Model 60IN60TPIH 500 HP, 30:1 L/D. 5/98, 43" center line height, 13.4:1 gearbox having new bearings (less thrust) with cooling unit, heat exchanger, motor driven...

Werner & Pfleiderer UK2000AEL Sigma Mixer/Extruder – 316 SS, 793 Gallon Capacity

• Manufacturer: WP

10131017 Used Werner & Pfleiderer Mixer/Extruder, Type UK2000AEL. 316 Stainless steel construction. Total capacity 793 gallon (3000 liter); working capacity 530 gallon (2000 liter). Bowl 56.6" x 65.5" x 54.6" dee...