Used Machine Tools in Sweden

Trusted Seller
Auction
Slip Sivers & Heger
- Manufacturer: Sivers & Häger
Type plate: Available but cannot be read | Width (mm): 550mm | Height (mm): 1500mm | Loading assistance with: Truck
Finspång, Sweden
Visit Auction Website
1997 Matsuura 700HG Yasnac J300M
- Manufacturer: Yasnac
Fuji inverter K75, "handy man" program, spindle oil/air cooler, Daikin oil cooler, Kuvoda air dryer.
Värnamo, Sweden
Drill table 1500mm
- Manufacturer: norima ab
Length: 1500mm | Width: 1000mm | Height: 500mm
Värnamo, Sweden
Trusted Seller
Auction
Drill Festool T 18+3-Basic
- Manufacturer: Festool
Box Instruction manual Width (mm): 40cm | Height (mm): 20cm | Depth (mm): 30cm
Malungsalen, Sweden
Visit Auction Website
Trusted Seller
Bankeryd H82
- Manufacturer: Bankeryd
Warehouse and transition to Köttkvarn H82
Enköping, Sweden
Trusted Seller
2017 CMZ TC 25 YS / 800
- Manufacturer: CMZ
Mazimum diameter of swing over bed: 920mm Mazimum diameter of swing over slide: 745mm Distance between spindle: 898mm X-axis: 315mm Z-axis: 800mm Y-axis: +80/-60mm B-axis: 803mm Maximum speed (rpm): 3500 ...
Eskilstuna, Sweden
Soraluce FP8000 Heidenhain iTNC530
- Manufacturer: Soraluce
Longitudinal movement: 8000mm | Transverse movement: 1300mm | Vertical movement: 2100mm | Floor plate: 9000x2000x300mm | Aut. angle head: 2.5°/2.5° 910Nm | Spindle speed: 20-4000rpm | Spindelkona: ISO50 | Feed/r...
Värnamo, Sweden
1999 CME FCM5000
Control system: Heidenhain TNC320 | Longitudinal movement: 5000mm | Transverse movement: 1000mm | Vertical movement: 1000mm | Table: 5500x950mm | Table load: 28000kg | Spindle speed: 3000rpm | Spindelkona: ISO50...
Värnamo, Sweden
Sachman FAS 1000-550
- Manufacturer: Sachman
Digital Longitudinal movement: 1030 mm | Transverse movement: 560 mm | Vertical movement: 725 mm | Pinole movement: 160 mm | Table: 1000x500 mm | Spindle-table distance: 0-725 mm | Overhang: 510 mm | Spindelkona:...
Värnamo, Sweden
UMA Werke SZM
Working diameter: 120 mm | Workpiece length: 800 mm | Spindle speed: 260-1850 rpm | Spider cones: ISO 40 | Length feeding: 15-600 mm/min | Spindle motor: 2x4.5/5.5 kW
Värnamo, Sweden
Trusted Seller
MH25 - Mazak FH 680 X 1998
- Manufacturer: Mazak
- Model: FH 680X
Installed 1998 Mazatrol M Plus 6 pc 10.000 rpm CAT 50 ATC 120 Travels X/Y/Z: 1050 x 800 x 825 mm
Jönköpings län, Sweden
Trusted Seller
MV58 - 2008 Mazak VTC 200 C II
- Manufacturer: Mazak
- Model: VTC 200C II
Installed 2008 Mazatrol 640 M Travels X/Y/Z: 1660 / 510 / 510mm Spindle rpm: 12 000 ATC magazine: 30 Chip conveyor With double C Axis
Hillerstorp, Sweden
Trusted Seller
MH16 - Mazak H 400
- Manufacturer: Mazak
- Model: H 400
Installed 1988 Mazatrol M 2 Travels X/Y/Z : 560/510/510mm Index table: 1° Table size: 400x400mm Pallets: 2 Spindle rpm: 7000 ATC magazine: 30 ISO 40
Hillerstorp, Sweden
Peter Wolters 2U8
- Manufacturer: Peter Wolters
New timing relay, all bearings replaced. After that, the machine has only been test driven. Device for aut. supply of lip agent W45. Both the upper and lower disc as well as the height adjustment are motorized.
Värnamo, Sweden
Trusted Seller
Gidding & Lewis Endomatic HDB
- Manufacturer: Giddings & Lewis
- Model: Endomatic HDB
Machine is equipped with two picking arms that load and pick out details. Also a conveyor belt is included. This info is prepared to the best of our ability - but is not binding in detail. All prices are exclusiv...
Gnosjö, Sweden
Mazak VQC 15/40 Machining Center
- Manufacturer: Mazak
- Model: VQC 15/40
Good condition Mazak VQC 15/40 Machining Centers available between 1986 and 1995 years. Located in Sweden and other countries. Click request price for more information.
Sweden