Roll table for Roundo R-models
- Manufacturer: Roundo
Värnamo, Sweden- Trusted Seller
Roundo PM0
- Manufacturer: Roundo
This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price / currency changes.
Gnosjö, Sweden 
Platform for Roundo R6-S 250242
- Manufacturer: Roundo
Construction covered in stainless steel Working width: 1200mm | Total width: 4360mm | Total length: 2370mm | Height over floor: 350mm
Värnamo, Sweden- Trusted Seller
1983 Roundo R3
- Manufacturer: Roundo
- Model: R3
Standard rolls consisting of narrow roller Ø225x45 + wide roller 225x45 mm & driving roller Ø160x25 mm 3-groove rolls Ø200 mm for bending round profiles with Ø~18/35/44 mm nylon 3-groove rolls for bending round p...
Gnosjö, Sweden - Trusted Seller
Roundo PASS230
- Manufacturer: Roundo
This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price / currency changes.
Gnosjö, Sweden - Trusted Seller
1981 Roundo R3
- Manufacturer: Roundo
- Model: R3
Standard rolls consisting of narrow roller Ø225x45 + wide roller 225x45 mm & driving roller Ø160x25 mm rolls for bending round profiles Ø~38 mm rolls for bending round profiles Ø~75 mm rolls for bending round pro...
Gnosjö, Sweden 
2002 Roundo PAS500x4200 180375
- Manufacturer: Roundo
- Model: PAS
Top support Side support Hardened Rolls DRO Top condition
Värnamo, Sweden
1983 Roundo PS280x2000
- Manufacturer: Roundo
Pre-bending capacity: 12mm | Capacity ø840mm: 18mm | Capacity >ø3000: 20mm | Working length: 2000mm | Engine: 7,5kW | Length: 3640mm | Width: 1490mm | Height: 1630mm | Weight: 7100kg
Värnamo, Sweden
1983 Roundo PS280x2000 180422
- Manufacturer: Roundo
Cone bending Capacity prebending: 12mm | Capacity ø840mm: 18mm | Capacity >ø3000: 20mm | Workinglength: 2000mm | Motor: 7,5kW | Length: 3640mm | Width: 1490mm | Height: 1630mm | Weight: 7100kg
Värnamo, Sweden
2002 Roundo PAS500x4200
- Manufacturer: Roundo
- Model: PAS
Pre-bending: 22mm | Bending capacity ø1.5m full length: 27mm | Bending capacity ø3.5m full width: 33mm | Bending capacity ø>3.5m width 1250mm: 43,5mm | Working length: 4200mm | Over-rolled: 500mm | Side rollers:...
Värnamo, Sweden
2009 Roundo PAS 550x3000 wCNC²
- Manufacturer: Roundo
- Model: PAS-550
Pre-bending full length: 40mm | Bending capacity ø1.65m full width: 45mm | Bending capacity ø1.65m width1.5m: 56mm | Bending capacity ø>3.5m full width: 52mm | Bending capacity ø>3.5m width 1.5m: 65mm | Working ...
Värnamo, Sweden
2009 Roundo PAS 550x3000 wCNC² 180402
- Manufacturer: Roundo
- Model: PAS-550
Top support up to ø6,5m Side support wCNC² infeed table with hydraulic sidemovement of the plate.
Värnamo, Sweden
ROUNDO profile rounding machine R-4
- Manufacturer: Roundo
- Model: R4
Used ROUNDO profile rounding machine R-4 Production no: 75402 | Capacity flat iron high edge: 100×18mm | Capacity flat iron low edge: 200×30mm | Capacity angle iron (cap.angleiro): 70×7, 90×9mm | Capacity t-iron:...
Själevad, Sweden
ROUNDO R-4-S
- Manufacturer: Roundo
- Model: R4
New ROUNDO R-4-S – Axle diameter 105 mm – Max cap 30-40 cm3
Själevad, Sweden
Finspång, Sweden
Roundo PAS Rolling Mills (metalworking)
- Manufacturer: Roundo
- Model: PAS
Good condition Roundo PAS Rolling Mills (metalworking)s manufactured in 2009. Located in Sweden and other countries. Click request price for more information.
Sweden
Tip: Enter manufacturer, model or keyword