Used Extruders

Industrial Twin Screw Extruder – Krauss Maffei Model KMD90, Electrically Heated, Oil Cooled Barrel

• Manufacturer: Krauss-Maffei

52102001 Used 90mm Krauss Maffei Model KMD90 Counter-Rotating Twin Screw Extruder. Has electrically heated oil cooled barrel. Driven by 40HP DC motor with SCR control. Includes temperature control panel.

6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder

• Manufacturer: Davis-Standard
• Model: Thermatic

6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder 6″ Davis Standard Model 600S Thermatic Extruder 8″ x 8″ water cooled square feed throat, all new gearbox bearings (less thrust) 17.21 gearbox rat...

APV Baker Perkins MP50/25D Twin Screw Extruder – 330 LBS/HR Capacity

• Manufacturer: Baker Perkins

51164005 Used APV Baker Perkins Twin Screw Extruder, type MP50/25D. 50 mm dia. twin screws. 25:1 L/D. Co-rotating. Electrically heated, water cooled. Max Screw speed 500 RPM via a gearbox by a 55.2 KW (74hp)-3/50...

Gloucester 25225R2 Single Screw Extruder – 2.5" Dia., 32:1 L/D, 60 HP Motor

• Manufacturer: GloucesterGloucester

10755152 Used Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is se...

Werner & Pfleiderer Mixer/Extruder – Type UK12-AU3, 21 Gallon Capacity, Carbon Steel

• Manufacturer: WP

48594 Used Werner & Pfleiderer Mixer/Extruder, Type UK12-AU3. 21 Gallon (80 liter) working capacity, 29.1 gallon (110 liter) total capacity. Material of construction is carbon steel on product contact parts. 20-1...

Davis Standard 9" Extruder, Model 80IN80HT – 32:1 L/D, 900 HP Motor, Built 2001

• Manufacturer: Davis-Standard

10755163 Used Davis Standard 9" Extruder, Model 80IN80HT. 32:1 L/D ratio; (7) zone electrically heated, water cooled (closed loop), and vented barrel at a 44" center-line; 10.15:1 Gearbox reduction ratio; Gearbox...

3.5″ NRM PM70 -24:1 N/VENTED AIR COOLED EXTRUDER

• Manufacturer: NRM

3.5″ Davis Standard 24:1-Air Cooled -N-Vented Extruders (3) 1998

• Manufacturer: Davis-Standard

3.5″ Davis Standard Extruders Model #MV35IN35 – New 1998 (Three Available) Air Cooled 24:1 L/D Non-Vented HP 158 Gear Ratio: 17.39 SF 1.25

Coperian 30 mm – ZSK-30 – New 2010 Co-Rotating Twin Screw Extruder

Coperian 30 mm – ZSK-30 – New 2010 Co-Rotating Twin Screw Extruder Screw Diameter 30mm L/D Ratio 30:1 Number of Zones: 9-1 Feed, 3 Vented, 1 Side Feeder & 4 non vented Includes Side Feeder 15 HP Water Cooling 4...

Davis Standard 1.5" Extruder – Model 150IN DS-20, 24:1 L/D, Vented Barrel, 50 HP Gearbox

• Manufacturer: Davis-Standard
• Model: 150IN DS-20

10755179 Used Davis Standard 1.5" Extruder, Model 150IN DS-20. 24:1 L/D vented barrel at a 42" centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM screw speed. Ge...

Shangha Target 11" Rolling & Scoring Line with Extruder – Chiclet Production

52189024 Used Shangha Target 11" Rolling & Scoring Line with Extruder. Designed to make chiclets. Consisting of: Twin Screw extruder with 5" diameter screws, electrically heated, die for 11.5" sheet, Dusting conv...

75mm Davis Standard “Super Blue” Extruder 24:1 – Air Cooled 2013

Buy Farrel Co-Rotating Twin Screw Extruder with Gala & Acrison Feeder

• Manufacturer: Acrison

54182001 Used Farrel Twin Screw Pelletizing Line Consisting Of: (1) Farrel 37 mm FTX80 co-rotating twin screw extruder, 5 zone electrically heated, water cooled, approximately 40:1 L/D. Driven by a 25 hp, 500 vol...