- Trusted Seller
RANDCASTLE Ø51 мм × 203 мм
- Manufacturer: RANDCASTLE
Used 2" O.D. x 8" Wide Randcastle Sheet Extrusion 3-Roll Stack including Pull Roll Station and Single Position Winder.
Hainesport, NJ 
Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel
- Manufacturer: Welex
54129004 Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel. 1520 RPM max. screw speed. Electric heated, air cooled barrel. Vented barrel. 57" barre...
Belvidere, IL- Trusted Seller
BRABENDER 88
- Manufacturer: Brabender
Used 25mm 24/1 L/D Brabender twin screw extruder package. Has air cooled extruder, temperature control panel, type D10002, prep center with model 088 type 09-25-000 temperature pressure module. Includes 10 HP DC ...
Hainesport, NJ - Trusted Seller
2000 CLOEREN 2.5", 3.5" and 5.25"
- Manufacturer: CLOEREN
Used Cloeren 3-layer co-ex block designed for asymmetric layer configurations (A/B/C at 12/64/24%). For 2.5", 3.5" and 5.25" extruders. Manufactured 2000 Never used. Feed block is a variable geometry vein type.
Hainesport, NJ - Trusted Seller
LEISTRITZ 30mm
- Manufacturer: Leistritz
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled ...
Hainesport, NJ - Trusted Seller
KOELLMANN CG14-0-201
- Manufacturer: KOELLMANN
Used 53mm NFM Welding Engineers side feed extruder with no barrel or screws. Has Koellmann gearbox, size CG14-0-201, serial #1227336/1, with 5.06/1 ratio, service factor 1.0, input rpm 1750, output rpm 350, ratin...
Hainesport, NJ - Trusted Seller
2008 COPERION ZSK-40-MEGA
- Manufacturer: Coperion Waeschle
Used 40mm Coperion Mega 40 co-rotating twin screw extruder. New 2008. No barrels or screws included. Driven by 200 hp AC motor, 1790 rpm, with Powerflight VFD controller. Has 1.155 gear ratio supplying 1200 rpm s...
Hainesport, NJ - Trusted Seller
PRODEX 4.5"
- Manufacturer: PRODEX
Used 4.5" pelletizing line consisting of the following: - 4.5" Prodex 34/1 L/D vented extruder including strand die, Lufkin "Change Gear" gearbox with 15.03/1 reduction, and an hydraulic screen changer with pump....
Hainesport, NJ - Trusted Seller
2002 LEISTRITZ ZSE 100
- Manufacturer: Leistritz
Used Leistritz 100mm 44/1 L/D Co-Rotating Twin Screw Extruder. Model ZSE100 GL/44D, serial #3092, new 2002. Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Ne...
Hainesport, NJ 
PET Sheet Extrusion Line – 48” Wide, 2,000 lbs/hr, OMV D140 Extruder, (
54129001 Used PET Sheet Extrusion Line Capable up to 48" Wide, currently has 32"W Allied Flex-Lip Extrusion Die. 2,000 lbs/hr, OMV D140 Extruder (Used) 350 HP main motor; 30 HP drive system; Rated up to 2,000 l...
Belvidere, IL- Trusted Seller
BATTENFELD CINCINNATI CM55
- Manufacturer: Battenfeld-Cincinnati
Used Battenfeld-Cincinnati model CM55 counter rotating approximately 55mm diameter twin screw extruder. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with 0.20...
Hainesport, NJ - Trusted Seller
Cincinnati Argos 112P-65-20-1150-UL
- Manufacturer: Cincinnati
Used 112mm Cincinnati model Argos 112P-65-20-1150-UL parallel counter rotating twin screw plastic extruder. Serial #2804784/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ration of 27:1. ...
Hainesport, NJ - Trusted Seller
Cincinnati CMT80L-APC
- Manufacturer: Cincinnati
- Model: CMT
Used Cincinnati model CMT80L-APC conical counter rotating twin screw plastic extruder. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adaptor plate that reduces the barrel exit down...
Hainesport, NJ - Trusted Seller
Hainesport, NJ - Trusted Seller
Hainesport, NJ
Tip: Enter manufacturer, model or keyword
