Building Filters
South Korea
K&S K&S1488 Plus
- Manufacturer: Kulicke & Soffa
Application: Wire bonding for various devices | ▲ work plate: Multi Unit Sorting
South Korea- Trusted Seller
'SMS' 20-Hi ZM Cold Strip Mill – AGC TENOVA AFC ABB
- Manufacturer: Tenova
‘SMS-DEMAG-SACK’ 20-Hi Sendzimir Reversing Cold Strip Mill- 2 AISI 300 and 400 series min. 510 mm 0.3 – 3.5 mm exit (with paper and sleeves) max. 1950 mm min. 10000 mm spec. 15 kg/mm strip width Unwinder: n = 0-4...
South Korea - Trusted Seller
'SMS' 20-Hi ZM Cold Strip Mill – AGC TENOVA AFC SUNDWIG
- Manufacturer: Andritz
‘SMS-DEMAG-SACK’ 20-Hi Sendzimir Reversing Cold Strip Mill AISI 300 and 400 series min. 510 mm 0.3 – 3.5 mm exit (with paper and sleeves) max. 1,950 mm min. 1,000 mm spec. 15 kg/mm strip width Unwinder: n = 0-408...
South Korea 
DS Precision Ind. Co. DS-Precision
- Manufacturer: DS Precision Ind. Co.
Application: Lapping/Polishing various wafers | - table motion: Rotational Motion | - stable repeatability: less than 5% | - work clamp: Rotation Guide | - workpiece: Max 6" | - table size: 380mm | - slurry spra...
South Korea
DISCO DFD641
- Manufacturer: Disco
- Model: DFD641
Application: Dicing/Cutting/Slotting various wafers | Models: 6"-compatible automatic dicing saw | Max. work size: ø 203.2 | X-axis: Cutting range (mm) | Max cutting speed (mm/s): 0.1 - 450 | Y-axis: Cutting ra...
South Korea
Disco DFD 651
- Manufacturer: Disco
- Model: DFD651
Application: Dicing/Cutting/Slotting various wafers | Maximum compatible wok size: ø 203.2 | Correspondence frame: 2-6, 2-8 | X-axis: Cutting range (mm) | Feed speed input range (mm/s): 0.1 - 450 | Y-axis: Cutti...
South Korea
Disco DFD 2D/8
- Manufacturer: Disco
- Model: DFD2D/8
Application: Dicing/Cutting/Slotting various wafers | Classification: item | Work size: 200 x 200 | X-axis: Useable stroke | Cut speed: 0.13 ~ 300 | Y-axis: Useable stroke | Indexing step: 0.0002 | Position accu...
South Korea
Disco DAD 320
- Manufacturer: Disco
- Model: DAD320
Application: Dicing/Cutting/Slotting various wafers | Classification: item | Work size: 160 x 160 | X-axis: Useable stroke | Cut speed: 0.13 ~ 300 | Y-axis: Useable stroke | Indexing step: 0.0002 | Position accu...
South Korea
Disco DAD 560
- Manufacturer: Disco
- Model: DAD560
Application: Dicing/Cutting/Slotting various wafers | Classification: item | Work size: ø152.4 | X-axis: Useable stroke | Cut speed: 0.04~300.00 | Bearing type: Linear guide | Y-axis: Useable stroke | Indexing s...
South Korea
Disco DAD 521
- Manufacturer: Disco
- Model: DAD521
Application: Dicing/Cutting/Slotting various wafers | Work size: ø152.4 | X-axis: Useable stroke | Cut speed: 0.3~300.0 | Bearing type: Linear guide | Y-axis: Useable stroke | Indexing step: 0.0001 | Position ac...
South Korea
Disco DAD-2H/6T
- Manufacturer: Disco
- Model: DAD2H/6T
Application: Dicing/Cutting/Slotting various wafers | ◆ workpiece size: ø160.4 | X-axis: stroke | Cut speed: 0.04 300.0 | Guide and driving method: Air guide,DC servomotor drive,belt feed | Y-axis: Useable strok...
South Korea
Disco DFD-2S/8
- Manufacturer: Disco
- Model: DFD2S/8
Application: Dicing/Cutting/Slotting various wafers | Drive method: AC Direct Drive | Stroke: 650mm Max | Effective cut stroke: 220mm | Cut speed: 0.7~3000mm/sec | Max programmable stroke: 220mm | Index speed: 3...
South Korea
Disco DFD-3D/8
- Manufacturer: Disco
- Model: DFD3D/8
Application: Dicing/Cutting/Slotting various wafers | Drive method: AC Servo Motor-Direct Drive | Minimum stroke: 652mm (25.7") (end to end) | Set-up cut stroke: 200mm(8.7") | Cut speed: 0.7~3000mm/sec (0.0028 t...
South Korea- Trusted Seller
Anritsu MG3700A, 250 KHz to 3GHz, Vector Signal Generator
- Manufacturer: Anritsu
- Model: MG3700A
Anritsu's 250 kHz to 3 GHz Vector Signal Generator, MG3700A, is for sale. The MG3700A vector signal generator has a built-in 160 MHz high-speed arbitrary waveform baseband generator, and features a wide vector mo...
South Korea