Used table type in Saxony, Germany

Frame press # B12164

Pressing at the corners Pneumatic Frame sizes are adjusted by two hand wheels frame press frame clamping table window clamping table used for frames of approx. 400-1000 x 1400-2300 mm (should be determined again ...

MUBEA panel drilling machine

• Manufacturer: Mubea

Plate drilling machine MUHR & BENDER (MUBEA) Mubea-Matic PI 200x100-1D Hole diameter:min/max:10/40 mm Opening of the gripper min/max:Type I: 5/45 mm Opening of gripper min/max:Type II: 45/85 mm Rapid traverse::8 ...

1984 AUERBACH FUW 400

• Manufacturer: Auerbach
• Model: FUW 400

Further information • Schile electrical cabinet with Heidenhain TNC 355 CNC control • Rigid angle table 710 x 400mm • splash guard / half cabin • Precision turnable by hand via crank • Head completely swing away ...

LORENZ SN4

• Manufacturer: Lorenz
• Model: SN4
• Wheel diameter: 180 millimeter

Wheel Ø - max.: 180 mm Tooth width - max.: 60 mm outside, 45 mm inside Module - max.: 4 Module - min.: 0,5 Stroke max.: 0 - 70 mm Stroke position adjustability: 88 mm Spindle mounting inside: MK 4 cutting wheel Ø...

2011 Xenon Automatisierungstechnik GmbH FXS-M

• Manufacturer: Xenon Automatisierungstechnik GmbH

Solar film/module production line, module dimensions (LxW) max. 1300x900 mm, capacity 20 MW, consisting consisting of: 1) 4 "Epson" stringer systems, type G6-551SW, for placing the solar cells fed on the carrier ...

2012 Injector sandblasting system with turntable #B16898

with 7 workpiece holding satellites Injector-cycle turntable blasting machine, sandblasting machine, blasting cabin, sandblasting machine used Material 12 mm steel Drive through rotary indexing table 7 workpiece ...

Hole punch ST022 #B15947

• Manufacturer: brand

Hole punch used pre-machining table approx. 600 mm 220/380 V The machine was used to punch holes approx. 2 mm in thin sheets. Changes and errors in the technical data, specifications and prices and subject to pri...

Hole punch PETS 0.5e #B14761

• Manufacturer: VEB Robotron Schreibmaschinenwerk

Hole punch for e.g. gaskets used table 280 x 280 mm distance to column approx. 45 mm drive SEW gear motor R302DT71D4 0,37 kW 171 rpm 220/380 V Subject to changes and errors in technical data, specifications and p...

2010 WMW-VEB ZFWZ 250/4 Retrofit

• Manufacturer: WMW
• Model: ZFWZ 250

Documentation: available Additional information max. workpiece Ø: 250 mm module: 6 Year of construction: ± 1983 Table: 275 mm Axial travel: 275 mm Tangential travel: 100 mm Tooth helix angle: 45 Spindle speed: 50...

2011 Mühlbauer SOL800T

• Manufacturer: Mühlbauer

Individual component from overall system Assembly/test line for contact hole punching, longitudinal cut, on 6 x 31 mm tape width, tape width 2x200 mm, 12x31 mm, tape length 3000 m, capacity 2x 10 MW, consisting ...

2004 SORALUCE SL 22 000

• Manufacturer: Soraluce
• Model: SL 22 000

Documentation: Additional information Automatic indexing milling head Autom. tool clamping: clamping force 15000 N Indexing accuracy/ repeatability: ± 3 sec. ˜ ± 0.002 mm Tightening bolt: DIN 69872 form A Number ...

2005 Geibel & Hotz GmbH RS 600 CNC

• Manufacturer: Geibel & Hotz
• Model: RS 600 CNC

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with...

SOMET tool presetter

• Manufacturer: Somet

Tool presetter SOMET SPS 200 U 2x measuring unit: FEINMESS DRESDEN Type: OFD FAE 4 Angle measuring system: MEOPTA Type: PMP 100 with base frame used, tested !

SOMET tool presetter

• Manufacturer: Somet

Tool presetter SOMET SPS 200 U 2x measuring unit: FEINMESS DRESDEN Type: OFD FAE 4 Angle measuring system: MEOPTA Type: PMP 100 on base frame New ! preserved ! Angle measuring system used !