Used machine tools in Groningen, Netherlands

Prism block made of steel – 225/257/H90 mm 34239

• Manufacturer: Stahl

Starting prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block

Cast marking prism – 101/97/H67 mm 36499

• Manufacturer: Guss

Starting prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block

Worm wheel from – Ø 134 mm / 63 teeth 36078

Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow ground gear

Dividing head from Walter – UTA 160 N 35889

• Manufacturer: Walter

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck

Tailstock from – center height 485 mm 35941

Tailstock, counter bearing for dividing head, dividing attachment

Dividing head from – 510/480/H250 mm 35511

• Manufacturer: Testa

Rotary table, indexing table, dividing head Partial head: Dividing head with three-jaw chuck | Type: unfortunately without type designation | Three jaw chuck: Ø 137 x 70 mm, inside Ø 37 mm | Spindle bore: Ø 25 mm...

Gear shaft from – Ø 67 x 45 mm / 30 teeth 35518

Gear, gear wheels, gear shaft, pinion shaft, spur gear, spur gear

Steel scribing prism - 250/120/H63 mm 29570

• Manufacturer: Stahl

Starting prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block

Steel scribing prism - 60/44/H50 mm 34425

• Manufacturer: Stahl

Starting prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block

Steel scribing prism - 160/50/H32 mm 34429

• Manufacturer: Stahl

Starting prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block

Scoring prism 2 prisms made of steel - 152/40/H25 mm 34423

• Manufacturer: Stahl

Starting prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block

Sprocket from – 35 teeth 1 1/4 x 3/4 27092

• Manufacturer: Theodor Eberlei

Sprocket, sprockets, single sprocket for roller chain, drive chain

Marking prism 1 piece of steel - 210/85 / H226 mm 17976

• Manufacturer: Stahl

Prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube

Clamping angle of steel - 475/195 / H195 mm 22259

• Manufacturer: Stahl

Clamping angle, clamping aid, Clamping angle for: Workpiece clamping | Strength: 31/40 mm | Holes: Ø 13 mm | Thread: M12 | Number: 2 pieces | Dimensions: 475/195 / H195 mm | Mass: 52 | Internal storage: 2A40305

Clamping angle of – 475/195/H195 mm 22512

Clamping angle, clamping aid Clamping angle for: Workpiece clamping | Strength: 35 mm | Holes: Ø 10/20 mm | Dimensions: 555/160 / H250 mm | Mass: 55 | Internal storage: 3A10306